Effects of molecular architecture on two‐step, melt‐spun poly(lactic acid) fibers
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Fibers of poly(lactic acid) (PLA) produced by two‐step melt spinning have been studied. The PLA resins used contain a 96:04 ratio of L:D stereochemical centers; however, one of the materials is branched by a peroxide treatment. The thermal, mechanical, and morphological properties of the fibers are compared for the two different molecular architectures. In the branched material, at least some of the branches exceed the entanglement molecular weight. The branched material is accordingly characterized by greater shear and extensional viscosity than the linear material. Fiber properties are highly influenced by the draw ratio; both branched and linear materials reach a plateau of about 35% crystallinity. The branched polymer reaches the plateau at a lower draw ratio, and this is indicative of faster crystallization kinetics. Both materials shrink in boiling water, and the amount of shrinkage decreases with increasing draw ratio. At an intermediate draw ratio of 6, the branched material is characterized by significantly larger shrinkage. With small‐angle X‐ray scattering and atomic force microscopy, the morphology is found to be fibrillar. Microfibril diameters range from approximately 20 to 30 nm and are almost identical for the two molecular architectures studied. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2839–2846, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Thermal and Rheological Properties of Commercial-Grade Poly(Lactic Acid)s
Dorgan, J. R., Lehermeier, H., & Mang, M. (2000) · Journal of Polymers and the Environment · doi:10.1023/a:1010185910301 · Cited by 294
Self-citationCrystallization and Microstructure of Poly(l-lactide-co-meso-lactide) Copolymers
Huang, J., Lisowski, M. S., Runt, J., Hall, E. S., Kean, R. T., Buehler, N., & Lin, J. S. (1998) · Macromolecules · doi:10.1021/ma9714629 · Cited by 187
Self-citation
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Industrial Upscaling of Electrospinning and Applications of Polymer Nanofibers: A Review
Persano, L., Camposeo, A., Tekmen, C., & Pisignano, D. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200290 · Cited by 965
Melt electrospinning today: An opportune time for an emerging polymer process
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.01.001 · Cited by 542
Metadata
- Authors
- Cicero, J. A., Dorgan, J. R., Garrett, J., Runt, J., & Lin, J. S.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2002-09-25
- Volume
- 86
- Issue
- 11
- Pages
- 2839-2846
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2120589186
- Cited by
- 92
- References
- 3
- FWCI
- 1.06
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.