The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Polylactide/montmorillonite nanocomposites and microcomposites prepared by melt blending: Structure and some physical properties
Abstract
Polylactide (PLA)/clay nanocomposites loaded with 3 wt % organomodified montmorillonite and PLA/clay microcomposites containing 3 wt % sodium montmorillonite were prepared by melt blending. We investigated the morphology and thermal properties of the nanocomposites and microcomposites and compared them with unfilled PLA, keeping the same thermomechanical history. The influence of the processing temperature on the structural characteristics of the investigated systems was determined. The investigations were performed with differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X‐ray diffraction (XRD), size exclusion chromatography (SEC), and polarized light microscopy (LM). XRD showed that the good affinity between the organomodified clay and the PLA was sufficient to form intercalated structure in the nanocomposite. The microcomposite featured a phase‐separated constitution. DSC and LM studies showed that the nature of the filler affected the ordering of the PLA matrix at the molecular and supermolecular levels. According to TGA, the PLA‐based nanocomposites exhibited improvement in their thermal stability in air. Reduced flammability, together with char formation, was also observed for nanocomposites, compared to the microcomposites and pure PLA. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1497–1506, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alexandre, M., & Dubois, P. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00012-7 · Cited by 6,377
Self-citationStudies on nylon 6/clay nanocomposites by melt-intercalation process
Liu, L., Qi, Z., & Zhu, X. (1999) · Journal of Applied Polymer Science · Cited by 743
Synthesis and properties of new poly(dimethylsiloxane) nanocomposites
Burnside, S. D., & Giannelis, E. P. (1995) · Chemistry of Materials · doi:10.1021/cm00057a001 · Cited by 663
Hasegawa, N., Kawasumi, M., Kato, M., Usuki, A., & Okada, A. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980103)67:1<87::aid-app10>3.0.co;2-2 · Cited by 662
Vaia, R. A., Vasudevan, S., Krawiec, W., Scanlon, L. G., & Giannelis, E. P. (1995) · Advanced Materials · doi:10.1002/adma.19950070210 · Cited by 626
Structure and thermal/mechanical properties of poly(l-lactide)-clay blend
Ogata, N., Jimenez, G., Kawai, H., & Ogihara, T. (1997) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19970130)35:2<389::aid-polb14>3.0.co;2-e · Cited by 469
Crystallization, properties, and crystal and nanoscale morphology of PET-clay nanocomposites
Ke, Y., Long, C., & Qi, Z. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990214)71:7<1139::aid-app12>3.0.co;2-e · Cited by 430
Weimer, M. W., Chen, H., Giannelis, E. P., & Sogah, D. Y. (1999) · Journal of the American Chemical Society · doi:10.1021/ja983751y · Cited by 390
Nanocomposites based on montmorillonite and unsaturated polyester
Kornmann, X., Berglund, L. A., Sterte, J., & Giannelis, E. P. (1998) · Polymer Engineering and Science · doi:10.1002/pen.10305 · Cited by 306
Synthesis and characterization of PS-clay nanocomposite by emulsion polymerization
Noh, M. W., & Lee, D. C. (1999) · Polymer Bulletin · doi:10.1007/s002890050510 · Cited by 297
Cited by
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Potential perspectives of bio-nanocomposites for food packaging applications
Sorrentino, A., Gorrasi, G., & Vittoria, V. (2007) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2006.09.004 · Cited by 1,112
Nano-biocomposites: Biodegradable polyester/nanoclay systems
BORDES, P., POLLET, E., & AVEROUS, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.002 · Cited by 1,033
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
Manufacturing process of cellulose whiskers/polylactic acid nanocomposites
Oksman, K., Mathew, A. P., Bondeson, D., & Kvien, I. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.03.002 · Cited by 783
Bionanocomposites: A New Concept of Ecological, Bioinspired, and Functional Hybrid Materials
Darder, M., Aranda, P., & Ruiz‐Hitzky, E. (2007) · Advanced Materials · doi:10.1002/adma.200602328 · Cited by 671
Multifunctional nanostructured PLA materials for packaging and tissue engineering
Armentano, I., Bitinis, N., Fortunati, E., Mattioli, S., Rescignano, N., Verdejo, R., Lopez-Manchado, M. A., & Kenny, J. M. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.010 · Cited by 645
An overview on the degradability of polymer nanocomposites
Pandey, J. K., Raghunatha Reddy, K., Pratheep Kumar, A., & Singh, R. P. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.09.013 · Cited by 584
Petersson, L., & Oksman, K. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.12.010 · Cited by 491
Recent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging Materials
Tang, X. Z., Kumar, P., Alavi, S., & Sandeep, K. P. (2012) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2010.500508 · Cited by 477
Paul, M.-A., Alexandre, M., Degée, P., Henrist, C., Rulmont, A., & Dubois, P. (2003) · Polymer · doi:10.1016/s0032-3861(02)00778-4 · Cited by 480
Self-citationFlame retardant mechanism of polyamide 6–clay nanocomposites
Kashiwagi, T., Harris, R. H., Zhang, X., Briber, R. M., Cipriano, B. H., Raghavan, S. R., Awad, W. H., & Shields, J. R. (2004) · Polymer · doi:10.1016/j.polymer.2003.11.036 · Cited by 461
Ray, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454
Bledzki, A. K., & Jaszkiewicz, A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.06.005 · Cited by 415
Mechanical properties of PLA composites with man-made cellulose and abaca fibres
Bledzki, A. K., Jaszkiewicz, A., & Scherzer, D. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.002 · Cited by 400
Polylactide/montmorillonite nanocomposites: study of the hydrolytic degradation
Paul, M.-A., Delcourt, C., Alexandre, M., Degée, P., Monteverde, F., & Dubois, P. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.10.011 · Cited by 326
Self-citationProgress in nano-biocomposites based on polysaccharides and nanoclays
Chivrac, F., Pollet, E., & Avérous, L. (2009) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2009.09.002 · Cited by 321
Polymer/montmorillonite nanocomposites with improved thermal properties
Leszczyńska, A., Njuguna, J., Pielichowski, K., & Banerjee, J. R. (2007) · Thermochimica Acta · doi:10.1016/j.tca.2006.11.003 · Cited by 315
Nanocomposites of PLA and PCL based on montmorillonite and sepiolite
Fukushima, K., Tabuani, D., & Camino, G. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.11.005 · Cited by 303
Bikiaris, N. D., Koumentakou, I., Samiotaki, C., Meimaroglou, D., Varytimidou, D., Karatza, A., Kalantzis, Z., Roussou, M., Bikiaris, R. D., & Papageorgiou, G. Z. (2023) · Polymers · doi:10.3390/polym15051196 · Cited by 279
Poly(Lactic Acid)-Based Biomaterials: Synthesis, Modification and Applications
Xiao, L., Wang, B., Yang, G., & Gauthier, M. (2012) · Biomedical Science, Engineering and Technology · doi:10.5772/23927 · Cited by 277
Poly(lactic acid)/organoclay nanocomposites: Thermal, rheological properties and foam processing
Di, Y., Iannace, S., Maio, E. D., & Nicolais, L. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20366 · Cited by 257
Melt preparation and nucleation efficiency of polylactide stereocomplex crystallites
Anderson, K. S., & Hillmyer, M. A. (2006) · Polymer · doi:10.1016/j.polymer.2006.01.062 · Cited by 253
Influence of montmorillonite layered silicate on plasticized poly(l-lactide) blown films
Thellen, C., Orroth, C., Froio, D., Ziegler, D., Lucciarini, J., Farrell, R., D'Souza, N. A., & Ratto, J. A. (2005) · Polymer · doi:10.1016/j.polymer.2005.09.057 · Cited by 252
Pluta, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.057 · Cited by 247
Self-citationPluta, M., Paul, M., Alexandre, M., & Dubois, P. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20694 · Cited by 127
Self-citation(Plasticized) polylactide/(organo-)clay nanocomposites by in situ intercalative polymerization
Paul, M., Delcourt, C., Alexandre, M., Degée, P., Monteverde, F., Rulmont, A., & Dubois, P. (2005) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200400324 · Cited by 115
Self-citationPluta, M., Paul, M., Alexandre, M., & Dubois, P. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20697 · Cited by 66
Self-citationTanoue, S., Hasook, A., Iemoto, Y., & Unryu, T. (2006) · Polymer Composites · doi:10.1002/pc.20174 · Cited by 48
Metadata
- Authors
- Pluta, M., Galeski, A., Alexandre, M., Paul, M. ‐., & Dubois, P.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2002-08-28
- Volume
- 86
- Issue
- 6
- Pages
- 1497-1506
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2172257250
- Cited by
- 367
- References
- 16
- FWCI
- 11.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.