The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Preparation and characterization of poly(styrene butylacrylate) latex/nano‐ZnO nanocomposites
Abstract
Poly(styrene butylacrylate) latex/nano‐ZnO composites were prepared by blending poly(styrene butylacrylate) latex with a water slurry of nano‐ZnO particles, and the effects of certain parameters, such as particle size, dispersant type, dispersing time and others, on the dispersibility, mechanical properties, ultraviolet (UV) shielding and near infrared (NIR) shielding were investigated with transmission electron microscopy (TEM), an Instron testing machine, dynamic mechanical analysis and ultraviolet‐visible‐near infrared (UV‐VIS‐NIR) spectrophotometry. TEM observation showed that dispersants with long chains are better than those with short chains at enhancing the dispersibility of nano‐ZnO particles in a matrix; extending dispersing time also improves the dispersibility of nano‐ZnO particles in a matrix. Instron tests showed that the nanocomposite polymers embedded with nano‐ZnO particles had much higher tensile strength than the corresponding composite polymers with micro‐ZnO particles. As the nano‐ZnO content increased, the temperature of glass transition (Tg) of the nanocomposite polymer embedded with 60 nm ZnO particles first increased then decreased, but 100 nm ZnO and micro‐ZnO particles seemed to have no influence on the Tg of the composite polymers. The better dispersibility of nano‐ZnO particles resulted in higher Tg values. Increasing nano‐ZnO content or dispersibility could enhance the UV shielding properties of the nanocomposite polymers, and 60 nm ZnO particles could more effectively shield UV rays than 100 nm ZnO particles. Micro‐ZnO particles basically had no effect on the UV absorbance of the composite polymers. A blue‐shift phenomenon was observed at 365 nm when nano‐ZnO particles were present in the nanocomposite polymers. NIR analysis indicated that as nano‐ZnO content increased, the NIR shielding of the nanocomposite polymers increased, but the NIR shielding properties seemed to be more influenced by particle size than by the nano‐effect. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1923–1931, 2003
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Combining pinch and exergy analysis for process modifications
Feng, X., & Zhu, X. X. (1997) · Applied Thermal Engineering · doi:10.1016/s1359-4311(96)00035-x · Cited by 130
Cited by
Yetisen, A. K., Qu, H., Manbachi, A., Butt, H., Dokmeci, M. R., Hinestroza, J. P., Skorobogatiy, M., Khademhosseini, A., & Yun, S. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b08176 · Cited by 752
Degradation and stabilization of polyurethane elastomers
Xie, F., Zhang, T., Bryant, P., Kurusingal, V., Colwell, J. M., & Laycock, B. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.12.003 · Cited by 722
Continuous Hydrothermal Synthesis of Inorganic Nanoparticles: Applications and Future Directions
Darr, J. A., Zhang, J., Makwana, N. M., & Weng, X. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00417 · Cited by 614
Synthesis, optimization and applications of ZnO/polymer nanocomposites
Ponnamma, D., Cabibihan, J.-J., Rajan, M., Pethaiah, S. S., Deshmukh, K., Gogoi, J. P., Pasha, S. K. K., Ahamed, M. B., Krishnegowda, J., Chandrashekar, B. N., et al. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.01.081 · Cited by 304
Metadata
- Authors
- Xiong, M., Gu, G., You, B., & Wu, L.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2003-09-17
- Volume
- 90
- Issue
- 7
- Pages
- 1923-1931
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2062787294
- Cited by
- 228
- References
- 1
- FWCI
- 4.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation and characterization of poly(styrene butylacrylate) latex/nano‐ZnO nanocomposites. https://app.cochat.ai/papers/10.1002/app.12869
- The paper
- Xiong, M., Gu, G., You, B., & Wu, L. (2003). Preparation and characterization of poly(styrene butylacrylate) latex/nano‐ZnO nanocomposites. Journal of Applied Polymer Science. https://doi.org/10.1002/app.12869
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.