The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Development and application of triglyceride‐based polymers and composites
Abstract
Triglyceride oils derived from plants have been used to synthesize several different monomers for use in structural applications. These monomers have been found to form polymers with a wide range of physical properties. They exhibit tensile moduli in the 1–2 GPa range and glass transition temperatures in the range 70–120 °C, depending on the particular monomer and the resin composition. Composite materials were manufactured utilizing these resins and produced a variety of durable and strong materials. At low glass fiber content (35 wt %), composites produced from acrylated epoxidized soybean oil by resin transfer molding displayed a tensile modulus of 5.2 GPa, a flexural modulus of 9 GPa, a tensile strength of 129 MPa, and flexural strength of 206 MPa. At higher fiber contents (50 wt %) composites produced from acrylated epoxidized soybean oil displayed tensile and compression moduli of 24.8 GPa each, and tensile and compressive strengths of 463.2 and 302.6 MPa, respectively. In addition to glass fibers, natural fibers such as flax and hemp were used. Hemp composites of 20% fiber content displayed a tensile strength of 35 MPa and a tensile modulus of 4.4 GPa. The flexural modulus was ∼2.6 GPa and the flexural strength was in the range 35.7–51.3 MPa, depending on the test conditions. The flax composite materials had tensile and flexural strengths in the ranges 20–30 and 45–65 MPa, respectively. The properties exhibited by both the natural‐ and synthetic fiber‐reinforced composites can be combined through the production of “hybrid” composites. These materials combine the low cost of natural fibers with the high performance of synthetic fibers. Their properties lie between those displayed by the all‐glass and all‐natural composites. Characterization of the polymer properties also presents opportunities for improvement through genetic engineering technology. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 703–723, 2001
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of Polymer Chemistry.
Huggins, M. L. (1954) · Journal of the American Chemical Society · doi:10.1021/ja01639a090 · Cited by 16,550
Mechanical Properties of Polymers and Composites
Landel, R. F., & Nielsen, L. E. (1993) · CRC Press eBooks · doi:10.1201/b16929 · Cited by 3,666
MURPHY, W. J. (1956) · Chemical & Engineering News Archive · doi:10.1021/cen-v034n034.p4017 · Cited by 3,147
Properties and modification methods for vegetable fibers for natural fiber composites
Bledzki, A. K., Reihmane, S., & Gassan, J. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960222)59:8<1329::aid-app17>3.0.co;2-0 · Cited by 906
Principles of polymer engineering
Blanshard, J. M. V. (1988) · Carbohydrate Polymers · doi:10.1016/0144-8617(88)90079-3 · Cited by 790
Bailey's industrial oil and fat products
Gordon, M. (1997) · Food Control · doi:10.1016/s0956-7135(97)82008-7 · Cited by 787
Principles of Polymer Engineering
McCrum, N. G., Buckley, C. P., & Bucknall, C. B. (2026) · doi:10.1093/9780191821677.001.0001 · Cited by 578
The technology of plasticizers
Sears, J., & Darby, J. R. (1982) · Wiley eBooks · Cited by 517
Mechanical properties of pineapple leaf fiber-reinforced polyester composites
Devi, L. U., Bhagawan, S. S., & Thomas, S. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970531)64:9<1739::aid-app10>3.0.co;2-t · Cited by 426
Fatty Acid and Lipid Chemistry
Gunstone, F. D. (1996) · Springer eBooks · doi:10.1007/978-1-4615-4131-8 · Cited by 380
Composites from Natural Fibers and Soy Oil Resins
Williams, G. I., & Wool, R. P. (2000) · Applied Composite Materials · doi:10.1023/a:1026583404899 · Cited by 335
Self-citationBamboo fiber-reinforced polypropylene composites: A study of the mechanical properties
Chen, X., Guo, Q., & Mi, Y. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980906)69:10<1891::aid-app1>3.0.co;2-9 · Cited by 317
Soybeans: Chemistry, Technology, and Utilization
Liu, K. (1997) · Springer eBooks · doi:10.1007/978-1-4615-1763-4 · Cited by 316
Glycerolysis of fats and methyl esters — Status, review and critique
Sonntag, N. O. V. (1982) · Journal of the American Oil Chemists' Society · doi:10.1007/bf02634442 · Cited by 255
World oilseeds: chemistry, technology, and utilization
Salunkhe, D. K. (1992) · Van Nostrand Reinhold eBooks · Cited by 227
Hornsby, P. R., Hinrichsen, E. L., & Tarverdi, K. (1997) · Journal of Materials Science · doi:10.1023/a:1018521920738 · Cited by 223
World oilseeds; chemistry, technology and utilization
Gordon, M. H. (1993) · Food Chemistry · doi:10.1016/0308-8146(93)90248-e · Cited by 213
Mechanical properties of jute-reinforced plastics
Shah, A., & Lakkad, S. C. (1981) · Fibre Science and Technology · doi:10.1016/0015-0568(81)90030-0 · Cited by 205
Can, E., Küsefoǧlu, S. H., & Wool, R. P. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1414 · Cited by 150
Self-citationEffect of moisture content on the properties of silanized jute‐epoxy composites
Gassan, J., & Bledzki, A. K. (1997) · Polymer Composites · doi:10.1002/pc.10272 · Cited by 149
Polymer Applications of Renewable-Resource Materials
Carraher, C. E., & Sperling, L. H. (1983) · Springer eBooks · doi:10.1007/978-1-4613-3503-0 · Cited by 106
Carlson, K. D., & Chang, S. (1985) · Journal of the American Oil Chemists Society · doi:10.1007/bf02541763 · Cited by 87
The chemistry of organic film formers
Billmayer, F. W. (1968) · Journal of the Franklin Institute · doi:10.1016/0016-0032(68)90117-8 · Cited by 85
Compressive strength of jute-glass hybrid fibre composites
Mohan, R., Kishore, K., Shridhar, M. K., & Rao, R. M. V. G. K. (1983) · Journal of Materials Science Letters · doi:10.1007/bf00722222 · Cited by 73
Naturally functionalized triglyceride oils in interpenetrating polymer networks
Barrett, L. W., Sperling, L. H., & Murphy, C. J. (1993) · Journal of the American Oil Chemists Society · doi:10.1007/bf02542588 · Cited by 70
Rubber‐toughening epoxy thermosets with epoxidized crambe oil
Raghavachar, R., Letasi, R. J., Kola, P. V., Chen, Z., & Massingill, J. L. (1999) · Journal of the American Oil Chemists Society · doi:10.1007/s11746-999-0033-3 · Cited by 50
Lee, W., & Chen, C.-F. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980906)69:10<1993::aid-app11>3.0.co;2-u · Cited by 45
Cited by
Biodegradable composites based on lignocellulosic fibers—An overview
Satyanarayana, K. G., Arizaga, G. G. C., & Wypych, F. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.002 · Cited by 1,421
Vegetable oil-based polymeric materials: synthesis, properties, and applications
Xia, Y., & Larock, R. C. (2010) · Green Chemistry · doi:10.1039/c0gc00264j · Cited by 864
Polymers from triglyceride oils
Seniha Güner, F., Yağcı, Y., & Tuncer Erciyes, A. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.07.001 · Cited by 785
From monomers to polymers from renewable resources: Recent advances
Gandini, A., & Lacerda, T. M. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.11.002 · Cited by 620
Renewable polymeric materials from vegetable oils: a perspective
Lligadas, G., Ronda, J. C., Galià, M., & Cádiz, V. (2013) · Materials Today · doi:10.1016/j.mattod.2013.08.016 · Cited by 559
Metadata
- Authors
- Khot, S. N., Lascala, J. J., Can, E., Morye, S. S., Williams, G. I., Palmese, G. R., Kusefoglu, S. H., & Wool, R. P.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2001-08-13
- Volume
- 82
- Issue
- 3
- Pages
- 703-723
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2145143159
- Cited by
- 647
- References
- 27
- FWCI
- 9.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.