The dynamic properties of carbon black-loaded natural rubber vulcanizates. Part I
The DOI matches its Crossref record, with a small difference in title or year; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The dynamic properties of a natural vulcanized rubber containing carbon black were studied for dynamic tensions of amplitude varying greatly. It was shown that both the elastic responses and viscosity change with amplitude of oscillation and with concentration and type of carbon black. The effects of thermal treatment on the dynamic modulus were also studied. Beginning with conditions of equilibrium between the hard and soft regions of the vulcanizate for very weak stresses, the values for the formation of hard regions from soft regions were determined by means of the Van't hoff isochore.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“when the rubber compounds filled with carbon black are under cyclic loading conditions with small strain amplitudes, the storage modulus is found to rapidly decrease as the strain amplitude increases.”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [392]
In the citing paper
“Such a behavior is the so-called “Payne effect” [392,393], which is attributed to the deformation-induced change of the internal microstructure of elastomeric solids, i.e., the breakage and recovery of weak physical bonds between carbon black clusters.”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [392]
Citations
Cites
Reiner, M., & Leaderman, H. (1960) · Physics Today · doi:10.1063/1.3057119 · Cited by 235
A note on the existence of a yield point in the dynamic modulus of loaded vulcanizates
Payne, A. R. (1960) · Journal of Applied Polymer Science · doi:10.1002/app.1960.070030721 · Cited by 144
Self-citationGehman, S. D., Woodford, D. E., & Stambaugh, R. B. (1941) · Industrial & Engineering Chemistry · doi:10.1021/ie50380a015 · Cited by 72
Vibration Characteristics of Tread Stocks
Gui, K., Wilkinson, C. S., & Gehman, S. D. (1952) · Industrial & Engineering Chemistry · doi:10.1021/ie50508a021 · Cited by 17
Research works printed but not linked: 7
- Fletcher W. P., 1953, Trans. Inst. Rubber Ind., 29, 266
- Waring J. R. S., 1950, Trans. Inst. Rubber Ind., 26, 4
- Payne A. R. Proc. Rubber Technol. Conf. 3rd Conf. London Heffer 1954 p. 413.
- Bulgin D., 1958, Trans. Inst. Rubber Ind., 34, 201
- Payne A. R., 1956, Rev. gen. caoutchouc., 33, 885
- Umstätter H. Proc. Intern. Congr. Rheol. 2nd Congr. Oxford Butterworths London 1954 p. 414.
- Mullins L., 1954, Proc. Rubber Technol. Conf., 3rd Conf., 397
Cited by
Items 201–300 of 1,000
Characterization of systematically selected organo-montmorillonites for polymer nanocomposites
Jankovič, Ľ., Madejová, J., Komadel, P., Mošková, D. J., & Chodák, I. (2011) · Applied Clay Science · doi:10.1016/j.clay.2011.01.006 · Cited by 52
Ma, J., Zhang, L., & Wu, Y. (2012) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2012.755441 · Cited by 52
Hassanajili, S., & Sajedi, M. T. (2016) · Iranian Polymer Journal · doi:10.1007/s13726-016-0458-0 · Cited by 52
Kausar, A. (2017) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087917725773 · Cited by 52
Wei, L.-Y., Fu, X., Luo, M., Xie, Z., Huang, C., Zhou, J., Zhu, Y., Huang, G., & Wu, J. (2018) · RSC Advances · doi:10.1039/c7ra12830d · Cited by 52
Qi, S., Yu, M., Fu, J., Zhu, M., Xie, Y., & Li, W. (2018) · Soft Matter · doi:10.1039/c8sm01712c · Cited by 52
Wang, L., Zhang, J., Sun, Y., Zhang, T., Wang, L., Wang, J., Liang, Y., Hao, M., & Fu, Q. (2021) · Polymer · doi:10.1016/j.polymer.2021.123756 · Cited by 52
Linear‐nonlinear dichotomy of the rheological response of particle‐filled polymers
Randall, A. M., & Robertson, C. G. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40818 · Cited by 52
Mechanics constitutive models for viscoelastic solid materials: Development and a critical review
Zhou, X., Yu, D., & Barrera, O. (2022) · Advances in applied mechanics · doi:10.1016/bs.aams.2022.09.003 · Cited by 51
Study of the reinforcing mechanism and strain sensing in a carbon black filled elastomer
Georgousis, G., Pandis, C., Chatzimanolis-Moustakas, C., Kyritsis, A., Kontou, E., Pissis, P., Krajči, J., Chodák, I., Tabačiarová, J., Mičušík, M., et al. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.05.021 · Cited by 51
Nanostructured SiO 2 material: synthesis advances and applications in rubber reinforcement
Muhammud, A. M., & Gupta, N. K. (2022) · RSC Advances · doi:10.1039/d2ra02747j · Cited by 50
He, X., Shi, X., Hoch, M., & Gögelein, C. (2016) · Polymer Testing · doi:10.1016/j.polymertesting.2016.06.009 · Cited by 50
Preparation and Performance of Silica/Epoxy Group-Functionalized Biobased Elastomer Nanocomposite
Qiao, H., Wen-ji, X., Chao, M., Liu, J., Lei, W., Zhou, X., Wang, R., & Zhang, L. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b03517 · Cited by 49
Experimental and analytical study of secondary path variations in active engine mounts
Hausberg, F., Scheiblegger, C., Pfeffer, P. E., Plöchl, M., Hecker, S., & Rupp, M. (2014) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2014.11.024 · Cited by 49
Wollscheid, D., & Lion, A. (2013) · Computational Mechanics · doi:10.1007/s00466-013-0946-4 · Cited by 48
Ji, H., Yang, H., Zhou, X., Sun, C., Li, L., Zhao, S., Yu, J., Li, S., Wang, R., & Zhang, L. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110383 · Cited by 48
Maghami, S., Dierkes, W. K., & Noordermeer, J. W. M. (2016) · Rubber Chemistry and Technology · doi:10.5254/rct.16.84810 · Cited by 48
Recent advances on the structure–properties relationship of multiblock copolymers
Baeza, G. P. (2021) · Journal of Polymer Science · doi:10.1002/pol.20210406 · Cited by 47
Xu, Z., Wang, S., & Xu, C. (2014) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2014.02.013 · Cited by 47
Size-controlled self-assembly of anisotropic sepiolite fibers in rubber nanocomposites
Credico, B. D., Cobani, E., Callone, E., Conzatti, L., Cristofori, D., D’Arienzo, M., Dirè, S., Giannini, L., Hanel, T., Scotti, R., et al. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.10.032 · Cited by 47
Effect of structural arrest on Poisson’s ratio in nanoreinforced elastomers
Robertson, C. G., Bogoslovov, R. B., & Roland, C. M. (2007) · Physical Review E · doi:10.1103/physreve.75.051403 · Cited by 47
Wu, F., Zhang, S., Chen, Z., Zhang, B., Yang, W. M., Liu, Z., & Yang, M. (2016) · Polymer · doi:10.1016/j.polymer.2016.03.034 · Cited by 47
Guseva, D. V., Комаров, П. В., & Lyulin, A. V. (2014) · The Journal of Chemical Physics · doi:10.1063/1.4868231 · Cited by 46
Liu, X., Zhou, X., Yang, C., Huang, J., Kuang, F., & Wang, H. (2020) · Wear · doi:10.1016/j.wear.2020.203428 · Cited by 46
Utrera-Barrios, S. I., Perera, R., León, N., Santana, M. H., & Martínez, N. (2021) · Composites Part C Open Access · doi:10.1016/j.jcomc.2021.100133 · Cited by 46
Hussain, M. A., Yasin, S., Ali, A., Li, Z., Fan, X., Song, Y., Zheng, Q., & Wang, W. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107202 · Cited by 45
Primitive Path Analysis and Stress Distribution in Highly Strained Macromolecules
Hsu, H., & Kremer, K. (2017) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00808 · Cited by 45
Zhou, J., Wang, W., Song, Y., & Zheng, Q. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107432 · Cited by 45
Reinforcement of rubber with carbon black
Payne, A. R., & Whittaker, R. E. (1970) · Composites · doi:10.1016/0010-4361(70)90005-4 · Cited by 45
Self-citationMatrix dependence of the linear viscoelastic region in magnetorheological elastomers
Agirre-Olabide, I., Elejabarrieta, M. J., & Bou‐Ali, M. M. (2015) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x15580658 · Cited by 45
Song, Y., Wu, G., Wang, D., Peng, J., Zhang, C., & Zheng, Q. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110552 · Cited by 44
Ubaidillah, U., Imaduddin, F., Li, Y., Mazlan, S. A., Sutrisno, J., Koga, T., Yahya, I., & Choi, S. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/11/115002 · Cited by 44
Lipińska, M., & Imiela, M. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.01.020 · Cited by 44
Fan, X., Xu, H., Wu, C., Song, Y., & Zheng, Q. (2020) · Journal of Rheology · doi:10.1122/1.5124034 · Cited by 44
Preparation of lignin‐based filling antioxidant and its application in styrene‐butadiene rubber
Zhao, S., Li, J., Yan, Z., Lu, T., Liu, R., Han, X., Cai, C., Zhao, S., & Wang, H. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51281 · Cited by 44
Ettehadi, A., Ülker, C., & Altun, G. (2021) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2021.109210 · Cited by 44
Rigidity Percolation in Particle-Laden Foams
Cohen‐Addad, S., Krzan, M., Höhler, R., & Herzhaft, B. (2007) · Physical Review Letters · doi:10.1103/physrevlett.99.168001 · Cited by 44
Thorin, A., Azoug, A., & Constantinescu, A. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.07.014 · Cited by 44
Spectral hole burning to probe the nature of unjamming (Payne effect) in particle-filled elastomers
Robertson, C. G., & Wang, X. (2006) · Europhysics Letters (EPL) · doi:10.1209/epl/i2006-10256-8 · Cited by 44
GhavamiNejad, A., Hashmi, S., Joh, H., Lee, S., Lee, Y., Vatankhah‐Varnoosfaderani, M., & Stadler, F. J. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp55092c · Cited by 43
Ido, T., Yamaguchi, T., Shibata, K., Matsuki, K., Yumii, K., & Hokkirigawa, K. (2019) · Tribology International · doi:10.1016/j.triboint.2019.01.015 · Cited by 43
Gao, W., Lu, J., Song, W., Hu, J., & Han, B. (2019) · RSC Advances · doi:10.1039/c9ra02783a · Cited by 43
Praveen, S., Bahadur, J., Yadav, R. S., Billa, S., Patro, T. U., Rath, S. K., Ratna, D., & Patri, M. (2020) · Applied Acoustics · doi:10.1016/j.apacoust.2020.107535 · Cited by 43
Ivanoska-Dacikj, A., Bogoeva‐Gaceva, G., Rooj, S., Wießner, S., & Heinrich, G. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.09.009 · Cited by 43
Gracia, L. A., Liarte, E., Pelegay, J. L., & Calvo, B. (2010) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2009.12.002 · Cited by 43
Unterberger, M. J., Schmoller, K. M., Wurm, C., Bausch, A. R., & Holzapfel, G. A. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.03.008 · Cited by 43
Xu, Y., He, Q., Guo, Y., Huang, X., Dong, Y., Hu, Z.-W., & Kim, J. (2023) · Buildings · doi:10.3390/buildings13010239 · Cited by 42
Lu, S., Hu, X., Xu, B. Z., Bai, C., Wang, T., Ma, T., & Song, Y. (2024) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2024.109799 · Cited by 42
Xu, Y., Xu, Z., Guo, Y., Ge, T., Xu, C., & Huang, X. (2019) · Journal of vibration and acoustics · doi:10.1115/1.4042517 · Cited by 42
Li, X., Tian, C., Li, H., Liu, X., Zhang, L., Hong, S. K., Ning, N., & Tian, M. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106722 · Cited by 42
Gröhlich, M., Böswald, M., & Wallaschek, J. (2023) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2023.117703 · Cited by 42
Lorenz, H., Klüppel, M., & Heinrich, G. (2012) · ZAMM ‐ Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik · doi:10.1002/zamm.201100172 · Cited by 42
Han, J., Zhang, X., Guo, W., & Wu, C. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23233 · Cited by 42
Smith, J. C. (1976) · Polymer Engineering and Science · doi:10.1002/pen.760160603 · Cited by 42
Polystyrene Nanoparticles with Anionically Polymerized Polybutadiene Brushes
Zheng, L., Xie, A. F., & Lean, J. T. (2004) · Macromolecules · doi:10.1021/ma048499v · Cited by 42
de la Fuente, J., Fernández‐García, M., & Cerrada, M. L. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11941 · Cited by 41
Xu, Y., Xu, Z., Guo, Y., Dong, Y., Ge, T., & Xu, C. (2019) · Journal of Engineering Mechanics · doi:10.1061/(asce)em.1943-7889.0001680 · Cited by 41
Ojogbo, E., Tzoganakis, C., & Mekonnen, T. H. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106580 · Cited by 41
Wang, L., Ning, N., Zhang, L., Lu, Y., Tian, M., & Chan, T. W. (2013) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.12.004 · Cited by 41
Thermal Conductivity and Mechanical Properties of Carbon Black Filled Silicone Rubber
Wang, J., Li, Q., Wu, C., & Xu, H. (2014) · Polymers and Polymer Composites · doi:10.1177/096739111402200405 · Cited by 41
Mora‐Barrantes, I., Ibarra, L., Rodríguez, A., González, L. A., & Valentin, J. L. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12106e · Cited by 41
Application of the Christensen‐Lo Model to the Reinforcement of Elastomers by Fractal Fillers
Raos, G. (2003) · Macromolecular Theory and Simulations · doi:10.1002/mats.200390002 · Cited by 41
Advanced Nano-biocomposites Based on Starch
Xie, F., Pollet, É., Halley, P. J., & Avérous, L. (2014) · Springer eBooks · doi:10.1007/978-3-319-03751-6_50-1 · Cited by 40
Fabrication and viscoelastic characteristics of waste tire rubber based magnetorheological elastomer
Ubaidillah, U., Choi, H. J., Mazlan, S. A., Imaduddin, F., & Harjana (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/11/115026 · Cited by 40
Qin, H., Deng, C., Lu, S., Yang, Y., Guan, G., Liu, Z., & Yu, Q. (2019) · Polymer Composites · doi:10.1002/pc.25455 · Cited by 40
Allen, V., Chen, L., Englert, M., Moussaoui, A., & Pisula, W. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.108955 · Cited by 40
Reinforcement mechanism of silica surface hydroxyl: The opposite effect
Wang, B., Hu, J., Liu, K., Zhang, L., Jiang, H., & Li, C. (2023) · Applied Surface Science · doi:10.1016/j.apsusc.2023.157000 · Cited by 40
Moghaddam, S. Z., Sabury, S., & Sharif, F. (2013) · RSC Advances · doi:10.1039/c3ra46342g · Cited by 40
Thermodynamic and Molecular Origins of Crack Resistance in Polymer Networks
Chen, Z., & Suo, Z. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.5c00663 · Cited by 39
Chen, Y., Li, Z., Wen, S., Yang, Q., Zhang, L., Zhong, C., & Liu, L. (2014) · The Journal of Chemical Physics · doi:10.1063/1.4894502 · Cited by 39
Batistakis, C., Michels, M. A. J., & Lyulin, A. V. (2014) · Macromolecules · doi:10.1021/ma5003744 · Cited by 39
Mechanically Robust Hybrid POSS Thermoplastic Polyurethanes with Enhanced Surface Hydrophobicity
Song, X., Zhang, X., Li, T., Li, Z., & Chi, H. (2019) · Polymers · doi:10.3390/polym11020373 · Cited by 39
Pakdel, A. S., Niinivaara, E., Cranston, E. D., Berry, R. M., & Dubé, M. A. (2020) · Macromolecular Rapid Communications · doi:10.1002/marc.202000448 · Cited by 39
Ji, T., Zhang, L., Wang, W., Liu, Y., Zhang, X., & Lu, Y. (2012) · Polymer Composites · doi:10.1002/pc.22277 · Cited by 39
Wahba, L., D’Arienzo, M., Donetti, R., Hanel, T., Scotti, R., Tadiello, L., & Morazzoni, F. (2013) · RSC Advances · doi:10.1039/c3ra22706e · Cited by 39
Dynamic properties of an organic hybrid of chlorinated polyethylene and hindered phenol compound
Wu, C., Ōtani, Y., Namiki, N., Emi, H., Nitta, K., & Kubota, S. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2021 · Cited by 39
Li, Z., Liu, J., Zhang, Z., Gao, Y., Liu, L., Zhang, L., & Yuan, B. (2018) · RSC Advances · doi:10.1039/c7ra13415k · Cited by 38
Bouakaz, B. S., Habi, A., Grohens, Y., & Pillin, I. (2018) · Applied Clay Science · doi:10.1016/j.clay.2018.04.006 · Cited by 38
Tong, Y., Dong, X., & Qi, M. (2019) · Composites Communications · doi:10.1016/j.coco.2019.07.007 · Cited by 38
Li, X., Yang, Q., Li, H., Zhang, L., Hong, S. K., Ning, N., & Tian, M. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108687 · Cited by 38
He, S., Lin, Y., Chen, L., Cao, S., Lin, J., & Du, X. (2015) · Polymer Composites · doi:10.1002/pc.23648 · Cited by 38
Investigation of Carbon Black Network in Natural Rubber with Different Bound Rubber Contents
Qian, S., Huang, J., Guo, W., & Wu, C. (2007) · Journal of Macromolecular Science Part B · doi:10.1080/00222340701257588 · Cited by 38
Österlöf, R., Wentzel, H., Kari, L., Diercks, N., & Wollscheid, D. (2014) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2014.06.003 · Cited by 38
Liu, Y., Li, L., & Wang, Q. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32486 · Cited by 38
Stress-Softening and reinforcement of rubber
Harwood, J. A. C., Payne, A. R., & Whittaker, R. E. (1971) · Journal of Macromolecular Science Part B · doi:10.1080/00222347108212551 · Cited by 38
Self-citationHait, S., Kumar, L., Ijaradar, J., Ghosh, A. K., De, D., Chanda, J., Ghosh, P., Gupta, S. D., Mukhopadhyay, R., Wießner, S., et al. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.143274 · Cited by 37
Hejazi, I., Seyfi, J., Sadeghi, G. M. M., & Davachi, S. M. (2010) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2010.08.009 · Cited by 37
Local and Global Dynamics in Polypropylene Glycol/Silica Composites
Casalini, R., & Roland, C. M. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00354 · Cited by 37
Characterizing the Intrinsic Strength (Fatigue Threshold) of Natural Rubber/Butadiene Rubber Blends
Robertson, C. G., Stoček, R., Kipscholl, C., & Mars, W. V. (2019) · Tire Science and Technology · doi:10.2346/tire.19.170168 · Cited by 37
Wei, K., Zhao, Z., Ren, J., Ou, L., & Wang, P. (2019) · Vehicle System Dynamics · doi:10.1080/00423114.2019.1673444 · Cited by 37
Plagge, J., & Lang, A. (2021) · Polymer · doi:10.1016/j.polymer.2021.123513 · Cited by 37
Aini, N. A. M., Othman, N., Hussin, M. H., Sahakaro, K., & Hayeemasae, N. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.115167 · Cited by 37
Morphology–Property Relationship in Rubber-Based Nanocomposites: Some Recent Developments
Bhowmick, A. K., Bhattacharya, M., Mitra, S., Kumar, K. D., Maji, P. K., Choudhury, A. R., George, J. J., & Basak, G. C. (2010) · Advances in polymer science · doi:10.1007/12_2010_95 · Cited by 37
Barick, A. K., & Tripathy, D. K. (2009) · Polymers for Advanced Technologies · doi:10.1002/pat.1507 · Cited by 37
Fourier-Transform Rheology of Unvulcanized, Carbon Black Filled Styrene Butadiene Rubber
Schwab, L., Hojdis, N. W., Lacayo, J., & Wilhelm, M. (2016) · Macromolecular Materials and Engineering · doi:10.1002/mame.201500356 · Cited by 37
Lazim, А. M., Musbah, D. L., Chin, C. C., Abdullah, I., Mustapa, M. H. A., & Azfaralariff, A. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.11.016 · Cited by 37
High barrier properties against sulfur mustard of graphene oxide/butyl rubber composites
Zheng, L. G., Wang, D., Xu, Z., Zhang, L., Liu, L., & Wen, S. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.12.002 · Cited by 37
Seo, B., Kim, K., Lee, H., Lee, J.-Y., Kwag, G., & Kim, W. (2015) · Macromolecular Research · doi:10.1007/s13233-015-3055-8 · Cited by 37
Viscoelastic properties of carbon black suspension as a flocculated percolation system
Amari, T., Uesugi, K., & Suzuki, H. (1997) · Progress in Organic Coatings · doi:10.1016/s0300-9440(97)00033-7 · Cited by 37
Wang, C., Liu, Z., Wang, S., & Zhang, Y. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42907 · Cited by 36
Metadata
- Authors
- Payne, A. R.
- Corresponding author
- Payne, A. R.
- ORCID
- Payne, A. R.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1962-01
- Volume
- 6
- Issue
- 19
- Pages
- 57-63
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2125583706
- Cited by
- 1,098
- References
- 4
- Citations by year
- 2026: 59 · 2025: 61 · 2024: 72 · 2023: 71 · 2022: 59 · 2021: 69 · 2020: 69 · 2019: 69 · 2018: 48 · 2017: 49 · 2016: 68 · 2015: 36 · 2014: 57 · 2013: 50 · 2012: 32
- FWCI
- 10.30
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Applied Polymer Science (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and Applications
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Keywords
- natural rubber, carbon black, vulcanized rubber, dynamic characteristics, amplitude dependence, elastic response, viscosity, dynamic modulus, heat treatment, filler content
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.