The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The glass transition temperature of filled polymers and its effect on their physical properties
Abstract
The glass transition temperature, dynamic shear moduli, and bulk viscosities of Phenoxy PKHH (a thermoplastic polymer made from bisphenol‐A and epichlorohydrin) filled with glass beads and Attapulgite clay were investigated. The glass temperature of the polymer increased with increasing filler concentration and with increasing specific surface area of the filler. The data were interpreted by assuming that interactions between filler particles and the polymer matrix reduce molecular mobility and flexibility of the polymer chains in the vicinity of the interfaces. From the measured moduli and the viscosities of the filled and unfilled materials, the modulus reinforcement ratio in the glassy state and the relative viscosity in the viscous state were obtained as functions of the filler type and concentration. The relative modulus for the glass bead composite system follows the Kerner equation, while the clay‐filled systems exhibit slightly greater reinforcement. The relative viscosities are strongly temperature dependent and do not follow conventional viscosity predictions for suspensions. It is suggested that the filler has a twofold effect on the viscosity of the composite materials; one is due to its mechanical presence and the other is due to modifications of part of the polymer matrix caused by interaction. Using the WLF equation to express all modifications of the matrix, one can isolate a purely mechanical contribution to the viscosity reinforcement. This mechanical part is approximately bounded by the theoretical predictions of Kerner,32 Mooney, 36 and Brodnyan,41 for suspension viscosities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Williams, M. L., Landel, R. F., & Ferry, J. D. (1955) · Journal of the American Chemical Society · doi:10.1021/ja01619a008 · Cited by 8,083
Cited by
Dynamic mechanical properties of short sisal fibre reinforced polypropylene composites
Joseph, P. V., Mathew, G., Joseph, K., Groeninckx, G., & Thomas, S. (2003) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00020-9 · Cited by 352
Polymer nanocomposites: A small part of the story
Schadler, L. S., Brinson, L. C., & Sawyer, W. G. (2007) · JOM · doi:10.1007/s11837-007-0040-5 · Cited by 298
Pectin/carboxymethyl cellulose/microfibrillated cellulose composite scaffolds for tissue engineering
Ninan, N., Muthiah, M., Park, I.-K., Elain, A., Thomas, S., & Grohens, Y. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.06.067 · Cited by 255
Metadata
- Authors
- Droste, D. H., & Dibenedetto, A. T.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1969-10
- Volume
- 13
- Issue
- 10
- Pages
- 2149-2168
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2106394034
- Cited by
- 214
- References
- 1
- FWCI
- 5.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The glass transition temperature of filled polymers and its effect on their physical properties. https://app.cochat.ai/papers/10.1002/app.1969.070131011
- The paper
- Droste, D. H., & Dibenedetto, A. T. (1969). The glass transition temperature of filled polymers and its effect on their physical properties. Journal of Applied Polymer Science. https://doi.org/10.1002/app.1969.070131011
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.