The DOI matches its Crossref record.
Tensile properties and morphology of blends of polyethylene and polypropylene
Abstract
The tensile behavior of blends of linear polyethylene (PE) and isotactic polypropylene (PP) was examined in relation to their morphology. Yield stress increases monotonically with increasing PP content, while true ultimate strength is much lower in all blends than in the pure polymers as a result of early fracture. The blends fail at low elongation because of their two‐phase structure, consisting of interpenetrating networks or of islands of PE in a PP matrix, as shown by scanning electron microscopy of fracture surfaces and transmission electron microscopy of thin films. While spherulites in PP are very large (∼100 μm in diameter), addition of 10% or more of PE drastically reduces their average size. This, together with the profusion of intercrystalline links introduced by PE, may be associated with maximization of tensile modulus in blends containing ∼80% PP. Introduction of special nucleating agents to PP reduces average spherulite size and is accompanied by slight improvements in modulus. Thin films of blends strained in the electron microscope neck and fibrillate in their PE regions, but fracture cleanly with little fibrillation in areas of PP.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Formation of Co-continuous Structures in Melt-Mixed Immiscible Polymer Blends
Pötschke, P., & Paul, D. R. (2003) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-120018022 · Cited by 452
Doroudiani, S., Park, C. B., & Kortschot, M. T. (1998) · Polymer Engineering & Science · doi:10.1002/pen.10289 · Cited by 252
Microstructural aspects of failure in semicrystalline polymers
Schultz, J. M. (1984) · Polymer Engineering & Science · doi:10.1002/pen.760241007 · Cited by 176
Metadata
- Authors
- Lovinger, A. J., & Williams, M. L.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1980-08
- Volume
- 25
- Issue
- 8
- Pages
- 1703-1713
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2089017302
- Cited by
- 208
- References
- 0
- FWCI
- 4.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tensile properties and morphology of blends of polyethylene and polypropylene. https://app.cochat.ai/papers/10.1002/app.1980.070250817
- The paper
- Lovinger, A. J., & Williams, M. L. (1980). Tensile properties and morphology of blends of polyethylene and polypropylene. Journal of Applied Polymer Science. https://doi.org/10.1002/app.1980.070250817
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.