Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.

The three stages in degradation of polymers—polyethylene as a model substance

Albertsson, Ann‐Christine, Karlsson, Sigbritt · 1988 · Journal of Applied Polymer Science

Abstract

Data relating to the degradative conversion of 14 C present in low density polyethylene (LDPE) film to respiratory 14 CO 2 during a 10‐year aerated cultivation with soil are presented. The degradation was performed with two sets of LDPE samples, one without additive (PE) and the other containing UV sensitizer (NDPE). Samples were exposed to UV irradiation for 0, 7, 26, and 42 days. The degradation is characterized by three stages: (I) a constant degradation rate, (II) a parabolic decline in the rate of degradation, and (III) a subsequent final increase in the rate of degradation. The first step (I) is probably dependent on the environment. The material changes rapidly until some kind of equilibrium with the environment has been achieved. CO 2 is evolved, oxygen uptake is rapid, and a rapid change in mechanical properties is also observed. The second step (II) is characterized by low oxygen uptake, a low evolution of CO 2 and slow changes in the mechanical properties, crystallinity, and molecular weight. The changes in mechanical properties are not necessarily synchronous with the decrease in molecular weight. Step III, finally, is a rapid deterioration of the structure. The degradation rate increases again, and all the mechanical properties are more or less lost due to the final collapse of the structure. For an inert material such as PE, 10 years is a short time, so that only small indications of step III and a coming mineralization point can be observed. The changes are more evident for NDPE. The use of degradable materials, for example polypropiolactone, however, means that it is possible during a 2‐year period to study all three stages. An understanding of the mechanisms in each step will give a better base for lifetime predictions.

Overview

Integrity signals

Registry

Crossref · 10.1002/app.1988.070350515

Cites

11 of 11 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 11 references

Research works printed but not linked: 7

  1. Albertsson A.‐C., 1976, Proceedings of the 3rd International Biodegradation Symposium, 743
  2. Albertsson A.‐C., 1979, Appl. Polym. Symp., 35, 423
  3. A.‐C.Albertsson Eighth Annual Conference on Advances in the Stabilization and Controlled Degradation of Polymers Lucerne May 1986.
  4. Dolezel B., 1967, Bri. Plast., 40, 105
  5. Griffin G. J. L., 1983, Conference on Polyethylene 1933–1983, 29
  6. Henman T. J., 1983, Degradation and Stabilization of Polyolefins, 29
  7. Scott G., 1975, Polym. Age, 6, 54

Cited by

See all 195

Metadata

Authors
Albertsson, A., & Karlsson, S.
Affiliations
KTH Royal Institute of Technology (SE)
Venue
Journal of Applied Polymer Science
Publisher
Wiley
Published
1988-04
Volume
35
Issue
5
Pages
1289-1302
ISSN
  • 0021-8995 (ISSN-L)
  • 1097-4628
OpenAlex
W1986930043
Cited by
194
References
11
Citations by year
2026: 4 · 2025: 4 · 2024: 6 · 2023: 8 · 2022: 11 · 2021: 9 · 2020: 6 · 2019: 10 · 2018: 2 · 2017: 5 · 2016: 3 · 2015: 2 · 2014: 3 · 2013: 2
FWCI
2.47
Type
journal article
Language
en
Open access
closed
Locations
Journal of Applied Polymer Science (publishedVersion)
Topics
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and PVC
Keywords
polymer degradation, low-density polyethylene, UV degradation, CO2 evolution, oxygen consumption, mechanical properties, molecular weight reduction, crystallinity, mineralization, degradable polymers, lifetime prediction

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: The three stages in degradation of polymers—polyethylene as a model substance. https://app.cochat.ai/papers/10.1002/app.1988.070350515
The paper
Albertsson, A., & Karlsson, S. (1988). The three stages in degradation of polymers—polyethylene as a model substance. Journal of Applied Polymer Science. https://doi.org/10.1002/app.1988.070350515

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.