The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Influence of coupling agents and treatments on the mechanical properties of cellulose fiber–polystyrene composites
Abstract
Wood fibers of aspen in the form of chemithermomechanical pulp (CTMP) and Tembec 6816 have been used as reinforcing fillers in different varieties of polystyrene. The tensile strength, elongation, and energy at maximum point, as well as tensile modulus at 0.1% strain is reported. Also revealed is the optimum condition of compression molding. The influence of different coupling agents, such as poly[methylene(polyphenyl isocyanate)], silanes (A‐172, A‐174, A‐1100), and grating on the mechanical properties of composites is discussed. The extent of increase in mechanical properties depends on the weight percentage of fibers, the concentration of coupling agents, and the grafting level (add‐on %). Coating followed by an isocyanate treatment appears to be the best treatment. In addition, the isocyanate treatment and grafting are superior to the silane treatment. Experimental results are explained on the basis of possible interactions among cellulose fiber‐coupling agent‐polymer in the interfacial area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wood fibers as reinforcing fillers for polyolefins
Woodhams, R. T., Thomas, G., & Rodgers, D. K. (1984) · Polymer Engineering & Science · doi:10.1002/pen.760241504 · Cited by 391
CZARNECKI, L., & White, J. L. (1980) · Journal of Applied Polymer Science · doi:10.1002/app.1980.070250623 · Cited by 249
Low cost polyolefin composites containing pulp mill wood residue
Lightsey, G. R., Short, P., & Sinha, V. K. (1977) · Polymer Engineering and Science · doi:10.1002/pen.760170507 · Cited by 32
Cited by
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
Silane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244
George, J., Sreekala, M. S., & Thomas, S. (2001) · Polymer Engineering & Science · doi:10.1002/pen.10846 · Cited by 1,247
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
Mohanty, A. K., Misra, M., & Drzal, L. T. (2001) · Composite Interfaces · doi:10.1163/156855401753255422 · Cited by 1,072
Metadata
- Authors
- Maldas, D., Kokta, B. V., & Daneault, C.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1989-01-15
- Volume
- 37
- Issue
- 3
- Pages
- 751-775
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2087155750
- Cited by
- 286
- References
- 3
- FWCI
- 14.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.