Stereocomplex formation between enantiomeric poly(lactic acid). VIII. Complex fibers spun from mixed solution of poly(D‐lactic acid) and poly(L‐lactic acid)
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
To obtain poly(lactic acid) (PLA) complex fibers, spinning was performed by wet and dry methods from 5–10 g/dL chloroform solutions of poly(D‐lactic acid) (PDLA) and poly(L‐lactic), both with a viscosity‐average molecular weight of 3 × 10 5. The dope was extruded from a monohole nozzle into coagulation baths from ethanol and chloroform for wet spinning and into a drying column kept at 60°C for dry spinning. Scanning electron microscopic observation of the as‐spun fibers showed that the surface of the wet‐spun fiber had large basins with diameters of 50–100 μm and many pores with diameters from sub μm to 10 μm, whereas the surface of dry‐spun fiber had a microporous structure with the pore diameter of 1–3 μm. The tensile strength of the wet‐spun complex fiber was very low and could not be drawn at high temperatures, in contrast to the dry‐spun fiber. The tensile strength of dry‐spun complex fiber increased upon hot drawing and showed the tensile strength of 94 kg/mm 2 by drawing at 160°C to the draw ratio of 13. Differential scanning calorimetry revealed that the complex fibers contained both the stereocomplex crystallites (racemic crystallites) and the crystallites of the single polymers, PDLA and PLLA, regardless of the spinning methods. The ratio of the racemic crystallites to the single‐polymer crystallites increased with the draw ratio of the complex fiber. © 1994 John Wiley & Sons, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Self-citationTsuji, H., Hyon, S. H., & Ikada, Y. (1991) · Macromolecules · doi:10.1021/ma00020a026 · Cited by 334
Self-citationStereocomplex formation between enantiomeric poly(lactic acid)s. 6. Binary blends from copolymers
Tsuji, H., & Ikada, Y. (1992) · Macromolecules · doi:10.1021/ma00047a024 · Cited by 228
Self-citation
Cited by
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Self-citation
Metadata
- Authors
- Tsuji, H., Ikada, Y., Hyon, S., Kimura, Y., & Kitao, T.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1994-01-10
- Volume
- 51
- Issue
- 2
- Pages
- 337-344
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W1981688212
- Cited by
- 152
- References
- 3
- FWCI
- 4.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Stereocomplex formation between enantiomeric poly(lactic acid). VIII. Complex fibers spun from mixed solution of poly(D‐lactic acid) and poly(L‐lactic acid). https://app.cochat.ai/papers/10.1002/app.1994.070510216
- The paper
- Tsuji, H., Ikada, Y., Hyon, S., Kimura, Y., & Kitao, T. (1994). Stereocomplex formation between enantiomeric poly(lactic acid). VIII. Complex fibers spun from mixed solution of poly(D‐lactic acid) and poly(L‐lactic acid). Journal of Applied Polymer Science. https://doi.org/10.1002/app.1994.070510216
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.