The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Modification of cellulose fibers with functionalized silanes: Effect of the fiber treatment on the mechanical performances of cellulose–thermoset composites
Abstract
Unsaturated polyester and epoxy resin matrices were filled with silane‐treated cellulose fibers and the ensuing composites were tested in terms of mechanical properties before and after accelerated aging consisting of their immersion into water. The coupling agents used were γ‐aminopropyltriethoxysilane (APS), γ‐methacrylopropyltrimethoxysilane (MPS), hexadecytrimethoxysilane, and γ‐mercaptopropyltrimethoxysilane (MRPS) and those containing reactive functions capable of reacting at one end with the fibers and at the other with the matrix, namely, APS, MPS, and MRPS, were more efficient in improving the mechanical properties of the composites. The immersion into water induced a drastic loss of mechanical properties of the materials. The water uptake of the composites was also studied and showed that the silane treatment was poorly efficient in preventing cellulose from water absorption. The fracture surfaces were inspected by scanning electron microscopy, which confirmed the quality of the interface. These observations were in agreement with the results obtained from the dynamic mechanical characterization. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 974–984, 2005
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Cited by
Silane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244
Cellulosic nanocomposites: a review
(2008) · BioResources · doi:10.15376/biores.3.3.929-980 · Cited by 901
Commercial application of cellulose nano-composites – A review
Sharma, A., Thakur, M., Bhattacharya, M., Mandal, T., & Goswami, S. (2019) · Biotechnology Reports · doi:10.1016/j.btre.2019.e00316 · Cited by 762
Recent advances in surface-modified cellulose nanofibrils
Rol, F., Belgacem, M. N., Gandini, A., & Bras, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.09.002 · Cited by 698
Self-citationABDELMOULEH, M., BOUFI, S., BELGACEM, M., & DUFRESNE, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.07.003 · Cited by 691
Self-citationA Review on Pineapple Leaves Fibre and Its Composites
Asim, M., Abdan, K., Jawaid, M., Nasir, M., Dashtizadeh, Z., Ishak, M. R., & Hoque, M. E. (2015) · International Journal of Polymer Science · doi:10.1155/2015/950567 · Cited by 634
Surface modification of microfibrillated cellulose for epoxy composite applications
Lu, J., Askeland, P., & Drzal, L. T. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.028 · Cited by 492
Amine-Based Nanofibrillated Cellulose As Adsorbent for CO2 Capture from Air
Gebald, C., Wurzbacher, J. A., Tingaut, P., Zimmermann, T., & Steinfeld, A. (2011) · Environmental Science & Technology · doi:10.1021/es202223p · Cited by 457
Morphology and thermal properties of PLA–cellulose nanofibers composites
Frone, A. N., Berlioz, S., Chailan, J.-F., & Panaitescu, D. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.08.054 · Cited by 431
Physical properties of starch nanocrystal-reinforced pullulan films
KRISTO, E., & BILIADERIS, C. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.07.021 · Cited by 345
Kenaf (Hibiscus cannabinus L.) fibre based bio-materials: A review on processing and properties
Ramesh, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.11.001 · Cited by 321
Hokkanen, S., Repo, E., Suopajärvi, T., Liimatainen, H., Niinimaa, J., & Sillanpää, M. (2014) · Cellulose · doi:10.1007/s10570-014-0240-4 · Cited by 265
Conversion of an industrial waste to an oil sorbent by coupling with functional silanes
Demirel Bayık, G., & Altın, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.06.076 · Cited by 31
Metadata
- Authors
- Abdelmouleh, M., Boufi, S., Belgacem, M. N., Dufresne, A., & Gandini, A.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2005-08-04
- Volume
- 98
- Issue
- 3
- Pages
- 974-984
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2051151430
- Cited by
- 210
- References
- 1
- FWCI
- 4.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.