The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Rigid‐rod polymeric fibers
Abstract
This paper traces the historical development of high temperature resistant rigid‐rod polymers. Synthesis, fiber processing, structure, properties, and applications of poly(p‐phenylene benzobisoxazole) (PBO) fibers have been discussed. After nearly 20 years of development in the United States and Japan, PBO fiber was commercialized with the trade name Zylon® in 1998. Properties of this fiber have been compared with the properties of poly(ethylene terephthalate) (PET), thermotropic polyester (Vectran®), extended chain polyethylene (Spectra®), p‐aramid (Kevlar®), m‐aramid (Nomex®), aramid copolymer (Technora®), polyimide (PBI), steel, and the experimental high compressive strength rigid‐rod polymeric fiber (PIPD, M5). PBO is currently the highest tensile modulus, highest tensile strength, and most thermally stable commercial polymeric fiber. However, PBO has low axial compressive strength and poor resistance to ultraviolet and visible radiation. The fiber also looses tensile strength in hot and humid environment. In the coming decades, further improvements in tensile strength (10–20 GPa range), compressive strength, and radiation resistance are expected in polymeric fibers. Incorporation of carbon nanotubes is expected to result in the development of next generation high performance polymeric fibers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 100: 791–802, 2006
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Encyclopedia of polymer science and engineering
Bawn, C. S. H. (1987) · Polymer · doi:10.1016/0032-3861(87)90274-6 · Cited by 4,203
Ultra-high-strength polyethylene filaments by solution spinning/drawing
Smith, P., & Lemstra, P. J. (1980) · Journal of Materials Science · doi:10.1007/bf00551705 · Cited by 758
Crystallization and orientation studies in polypropylene/single wall carbon nanotube composite
Bhattacharyya, A. R., Sreekumar, T. V., Liu, T., Kumar, S., Ericson, L. M., Hauge, R. H., & Smalley, R. E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00073-9 · Cited by 725
Self-citationInternational Encyclopedia of Composites
Lee, S. M. (2001) · Medical Entomology and Zoology · Cited by 497
Fibers from polypropylene/nano carbon fiber composites
Kumar, S., Doshi, H., Srinivasarao, M., Park, J. O., & Schiraldi, D. A. (2002) · Polymer · doi:10.1016/s0032-3861(01)00744-3 · Cited by 381
Self-citationChae, H. G., Sreekumar, T. V., Uchida, T., & Kumar, S. (2005) · Polymer · doi:10.1016/j.polymer.2005.08.092 · Cited by 271
Self-citationYang, H. H. (1993) · Medical Entomology and Zoology · Cited by 254
Rigid‐Rod Polymers: Synthesis, Processing, Simulation, Structure, and Properties
Hu, X., Jenkins, S. E., Min, B. G., Polk, M. B., & Kumar, S. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200300013 · Cited by 182
Self-citationGel spinning of PVA/SWNT composite fiber
Zhang, X., Liu, T., Sreekumar, T. V., et al. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.048 · Cited by 153
Matheson, R. R., & Flory, P. J. (1981) · Macromolecules · doi:10.1021/ma50005a013 · Cited by 145
Cited by
Dispersions of Aramid Nanofibers: A New Nanoscale Building Block
Yang, M., Cao, K., Sui, L., Qi, Y., Zhu, J., Waas, A., Arruda, E. M., Kieffer, J., Thouless, M. D., & Kotov, N. A. (2011) · ACS Nano · doi:10.1021/nn2014003 · Cited by 852
Polymer/Carbon Nanotube Nano Composite Fibers–A Review
Liu, Y., & Kumar, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405136s · Cited by 552
Self-citationCarbon nanotube bundles with tensile strength over 80 GPa
Bai, Y., Zhang, R., Ye, X., Zhu, Z., Xie, H., Shen, B., Cai, D., Liu, B., Zhang, C., Jia, Z., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0141-z · Cited by 449
Chae, H. G., & Kumar, S. (2008) · Science · doi:10.1126/science.1153911 · Cited by 323
Self-citationRecent advances in fibre-hybrid composites: materials selection, opportunities and applications
Swolfs, Y., Verpoest, I., & Gorbatikh, L. (2019) · International Materials Reviews · doi:10.1080/09506608.2018.1467365 · Cited by 259
Superplasticity in an organic crystal
Takamizawa, S., Takasaki, Y., Sasaki, T., & Ozaki, N. (2018) · Nature Communications · doi:10.1038/s41467-018-06431-7 · Cited by 112
Metadata
- Authors
- Chae, H. G., & Kumar, S.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2006-01-26
- Volume
- 100
- Issue
- 1
- Pages
- 791-802
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2074527364
- Cited by
- 354
- References
- 15
- FWCI
- 12.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.