The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Preparation by melt mixing and characterization of isotactic polypropylene/SiO2 nanocomposites containing untreated and surface‐treated nanoparticles
Abstract
In the present study two series of isotactic polypropylene (iPP)/SiO 2 nanocomposites containing 1, 2.5, 5, 7.5, and 10 wt % SiO 2 nanoparticles were prepared by melt‐mixing on a twin‐screw corotating extruder. In the first series untreated fumed silica nanoparticles were used, whereas in the second nanoparticles were surface‐treated with dimethyldichlorosilane. In both cases, the average size of the primary nanoparticles was 12 nm. Tensile and impact strength were found to increase and to be affected mainly by the type and content of silica nanoparticles. A maximum was observed, corresponding to samples containing 2.5 wt % SiO 2. These findings are discussed in light of the SEM and TEM observations. By increasing the amount of nanoparticles, large aggregates of fumed silica could be formed, which may explain the reduction of mechanical properties with higher concentrations of SiO 2. However, it was found that surface‐treated nanoparticles produced larger aggregates than did those derived from untreated nanoparticles, despite the increased adhesion of the iPP matrix, as was postulated from yield strength. This behavior negatively affected mechanical properties. In addition, an effort was made to determine if toughening theories, mainly the critical interparticle distance for rubber toughening or composites, also might be applicable in nanocomposites. From DSC measurements it was demonstrated that silica nanoparticles acted as effective nucleating agents, increasing the crystallization rate and the degree of crystallinity of iPP. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2684–2696, 2006
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Impact modification of engineering thermoplastics
Kanai, H., Sullivan, V., & Auerbach, A. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070530507 · Cited by 69
Cited by
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
Zou, H., Wu, S., & Shen, J. (2008) · Chemical Reviews · doi:10.1021/cr068035q · Cited by 2,121
Ashraf, M. A., Peng, W., Zare, Y., & Rhee, K. Y. (2018) · Nanoscale Research Letters · doi:10.1186/s11671-018-2624-0 · Cited by 660
Polymer Nanocomposites: The “Nano” Effect on Mechanical Properties
Crosby, A. J., & Lee, J. (2007) · Polymer Reviews · doi:10.1080/15583720701271278 · Cited by 620
High-performance nanocomposites based on polyetherketones
Díez-Pascual, A. M., Naffakh, M., Marco, C., Ellis, G., & Gómez-Fatou, M. A. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.03.003 · Cited by 289
Advanced silica/polymer composites: Materials and applications
Lee, D. W., & Yoo, B. R. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.04.016 · Cited by 267
Metadata
- Authors
- Bikiaris, D. N., Papageorgiou, G. Z., Pavlidou, E., Vouroutzis, N., Palatzoglou, P., & Karayannidis, G. P.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2006-02-09
- Volume
- 100
- Issue
- 4
- Pages
- 2684-2696
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2095317579
- Cited by
- 197
- References
- 1
- FWCI
- 13.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation by melt mixing and characterization of isotactic polypropylene/SiO2 nanocomposites containing untreated and surface‐treated nanoparticles. https://app.cochat.ai/papers/10.1002/app.22849
- The paper
- Bikiaris, D. N., Papageorgiou, G. Z., Pavlidou, E., Vouroutzis, N., Palatzoglou, P., & Karayannidis, G. P. (2006). Preparation by melt mixing and characterization of isotactic polypropylene/SiO2 nanocomposites containing untreated and surface‐treated nanoparticles. Journal of Applied Polymer Science. https://doi.org/10.1002/app.22849
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.