Nucleating agent for poly(L‐lactic acid)—An optimization of chemical structure of hydrazide compound for advanced nucleation ability
The DOI matches its Crossref record.
Abstract
A series of compounds having hydrazide groups was prepared and evaluated as nucleating agent for poly(L‐lactic acid) by differential scanning calorimetry. Hydrazide compounds derived from benzoic acid, 2‐hydroxybenzoic acid, 3‐tert‐butylbenzoic acid, and 2‐aminobenzoic acid, where two of hydrazide compounds connected by four methylene chain were evaluated in series. Benzoylhydrazide type was found to be more effective on the enhancement of crystallization of poly(L‐lactic acid). Effects of connecting length of methylene chain numbers between two of benzoylhydrazide on the nucleation ability were also evaluated. Benzoylhydrazide‐type compound having 10 methylenes, that is, decamethylenedicarboxylic dibenzoylhydrazide demonstrated excellent nucleation ability, and the resulted crystallization temperature and enthalpy of PLA with the compound of 1 wt % loading were 131°C and 46 J g−1. The achieved crystallization temperature and enthalpy were over 10°C and over 10 J g−1 higher than PLA with conventional nucleating agents, such as talc and ethylenebis (12‐hydroxystearylamide). Thus, the improvement in processability, productivity, and heat resistance of PLA is suggested to be achieved by using decamethylenedicarboxylic dibenzoylhydrazide as a nucleating agent. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 198–203, 2007
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Biodegradable Polyesters from Renewable Resources
Tsui, A., Wright, Z. C., & Frank, C. W. (2013) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061312-103323 · Cited by 68
Metadata
- Authors
- Kawamoto, N., Sakai, A., Horikoshi, T., Urushihara, T., & Tobita, E.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2006-10-23
- Volume
- 103
- Issue
- 1
- Pages
- 198-203
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2069989766
- Cited by
- 201
- References
- 0
- FWCI
- 2.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.