The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Structure and properties of cellulose nanocomposite films containing melamine formaldehyde
Abstract
Films of high Young's modulus and low density are of interest for application as loudspeaker membranes. In the present study nanocomposite films were prepared from microfibrillated cellulose (MFC) and from MFC in combination with melamine formaldehyde (MF). The prepared materials were studied with respect to structure as well as physical and mechanical properties. Studies in SEM and calculation of porosity showed that these materials have a dense paper‐like structure. The moisture sorption isotherms were measured and showed that moisture content decreased in the presence of MF. Mechanical properties were studied by dynamical mechanical thermal measurements as well as by tensile tests. Cellulose films showed an average Young's modulus of 14 GPa while the nanocomposites showed an average Young's modulus as high as 16.6 GPa and average tensile strength as high as 142 MPa. By controlling composition and structure, the range of properties of these materials can extend the property range available for existing materials. The combination of comparatively high mechanical damping and high sound propagation velocity is of technical interest. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Nakagaito, A. N., & Yano, H. (2005) · Applied Physics A · doi:10.1007/s00339-003-2225-2 · Cited by 545
Nishi, Y., Uryu, M., Yamanaka, S., Watanabe, K., Kitamura, N., Iguchi, M., & Mitsuhashi, S. (1990) · Journal of Materials Science · doi:10.1007/bf00584917 · Cited by 232
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Ionic Liquids and Their Interaction with Cellulose
Pinkert, A., Marsh, K. N., Pang, S., & Staiger, M. P. (2009) · Chemical Reviews · doi:10.1021/cr9001947 · Cited by 1,508
Cellulose Nanopaper Structures of High Toughness
Henriksson, M., Berglund, L. A., Isaksson, P., Lindström, T., & Nishino, T. (2008) · Biomacromolecules · doi:10.1021/bm800038n · Cited by 1,299
Self-citationHenriksson, M., Henriksson, G., Berglund, L. A., & Lindström, T. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.05.038 · Cited by 1,183
Self-citationA review on modification methods to cellulose-based adsorbents to improve adsorption capacity
Hokkanen, S., Bhatnagar, A., & Sillanpää, M. (2016) · Water Research · doi:10.1016/j.watres.2016.01.008 · Cited by 1,081
Metadata
- Authors
- Henriksson, M., & Berglund, L. A.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2007-08-02
- Volume
- 106
- Issue
- 4
- Pages
- 2817-2824
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2152454796
- Cited by
- 318
- References
- 3
- FWCI
- 4.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.