The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Improving mechanical performance of injection molded PLA by controlling crystallinity
Abstract
Currently, use of poly(lactic acid) (PLA) for injection molded articles is limited for commercial applications because PLA has a slow crystallization rate when compared with many other thermoplastics as well as standard injection molding cycle times. The overall crystallization rate and final crystallinity of PLA were controlled by the addition of physical nucleating agents as well as optimization of injection molding processing conditions. Talc and ethylene bis‐stearamide (EBS) nucleating agents both showed dramatic increases in crystallization rate and final crystalline content as indicated by isothermal and nonisothermal crystallization measurements. Isothermal crystallization half‐times were found to decrease nearly 65‐fold by the addition of only 2% talc. Process changes also had a significant effect on the final crystallinity of molded neat PLA, which was shown to increase from 5 to 42%. The combination of nucleating agents and process optimization not only resulted in an increase in final injection molded crystallinity level, but also allowed for a decreased processing time. An increase of over 30°C in the heat distortion temperature and improved strength and modulus by upwards of 25% were achieved through these material and process changes. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Biodegradation and biocompatibility of PLA and PLGA microspheres
Anderson, J. M., & Shive, M. S. (1997) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00048-3 · Cited by 2,617
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Crystallization Behavior and Morphology of Biodegradable Polylactide/Layered Silicate Nanocomposite
Nam, J. Y., Sinha Ray, S., & Okamoto, M. (2003) · Macromolecules · doi:10.1021/ma034623j · Cited by 429
Crystallization kinetics of poly(l-lactic acid)
Vasanthakumari, R., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90129-5 · Cited by 406
New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties
Sinha Ray, S., Yamada, K., Okamoto, M., Fujimoto, Y., Ogami, A., & Ueda, K. (2003) · Polymer · doi:10.1016/j.polymer.2003.08.021 · Cited by 317
Pluta, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.057 · Cited by 247
Melting behavior and crystallization kinetics of starch and poly(lactic acid) composites
Ke, T., & Sun, X. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12162 · Cited by 200
Morphology and Properties of Soy Protein and Polylactide Blends
Zhang, J., Jiang, L., Zhu, L., Jane, J.-L., & Mungara, P. (2006) · Biomacromolecules · doi:10.1021/bm050888p · Cited by 176
Spinu, M., Jackson, C., Keating, M. Y., & Gardner, K. H. (1996) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329608014922 · Cited by 158
Lewitus, D., McCarthy, S., Ophir, A., & Kenig, S. (2006) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0007-6 · Cited by 110
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Narrowing the Gap for Bioplastic Use in Food Packaging: An Update
Zhao, X., Cornish, K., & Vodovotz, Y. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.9b03755 · Cited by 423
Metadata
- Authors
- Harris, A. M., & Lee, E. C.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2007-11-05
- Volume
- 107
- Issue
- 4
- Pages
- 2246-2255
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2014734348
- Cited by
- 545
- References
- 12
- FWCI
- 4.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
