The DOI matches its Crossref record.
Effect of fiber length on processing and properties of extruded wood‐fiber/HDPE composites
Abstract
Fiber length and distribution play important roles in the processing and mechanical performance of fiber‐based products such as paper and fiberboard. In the case of wood–plastic composites (WPC), the production of WPC with long fibers has been neglected, because they are difficult to handle with current production equipment. This study provides a better understanding of the effect of fiber length on WPC processing and properties. The objectives of this study were therefore to determine the role of fiber length in the formation process and property development of WPC. Three chemithermomechanical pulps (CTMP) with different lengths, distributions, and length‐to‐diameter ratios (L/D) were obtained by mechanical refining. Length, shape, and distribution were characterized using a fiber quality analyzer (FQA). The rheometer torque properties of high‐density polyethylene (HDPE) filled with the pulps at different loads were studied. Variations in fiber load and length distribution resulted in significant variations in melting properties and torque characteristics. Composites from the three length distributions were successfully processed using extrusion. Physical and mechanical properties of the obtained composites varied with both length distribution and additive type. Mechanical properties increased with increasing fiber length, whereas performance in water immersion tests decreased. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on new bio-based constituents for natural fiber-polymer composites
Väisänen, T., Das, O., & Tomppo, L. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.132 · Cited by 560
Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications
Ilyas, R. A., Sapuan, S. M., Harussani, M. M., Hakimi, M. Y. A. Y., Haziq, M. Z. M., Atikah, M. S. N., Asyraf, M. R. M., Ishak, M. R., Razman, M. R., Nurazzi, N. M., et al. (2021) · Polymers · doi:10.3390/polym13081326 · Cited by 513
Väisänen, T., Haapala, A., Lappalainen, R., & Tomppo, L. (2016) · Waste Management · doi:10.1016/j.wasman.2016.04.037 · Cited by 490
PLA Based Biopolymer Reinforced with Natural Fibre: A Review
Mukherjee, T., & Kao, N. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0320-6 · Cited by 348
Migneault, S., Koubaa, A., Erchiqui, F., Chaala, A., Englund, K., & Wolcott, M. P. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.10.004 · Cited by 263
Self-citation
Metadata
- Authors
- Migneault, S., Koubaa, A., Erchiqui, F., Chaala, A., Englund, K., Krause, C., & Wolcott, M.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2008-07-10
- Volume
- 110
- Issue
- 2
- Pages
- 1085-1092
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2036118979
- Cited by
- 179
- References
- 0
- FWCI
- 6.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of fiber length on processing and properties of extruded wood‐fiber/HDPE composites. https://app.cochat.ai/papers/10.1002/app.28720
- The paper
- Migneault, S., Koubaa, A., Erchiqui, F., Chaala, A., Englund, K., Krause, C., & Wolcott, M. (2008). Effect of fiber length on processing and properties of extruded wood‐fiber/HDPE composites. Journal of Applied Polymer Science. https://doi.org/10.1002/app.28720
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.