The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
A novel process to isolate fibrils from cellulose fibers by high‐intensity ultrasonication, Part 1: Process optimization
Abstract
Cellulose fibrils of microscale and nanoscale sizes have great strength and hence furnish the possibility of reinforcing polymers. Fibrils can be isolated from natural cellulose fibers by chemical or mechanical methods. However, the existing procedures either produce low yields or severely degrade the cellulose and, moreover, are not environment friendly or energy efficient. The purpose of this study was to develop a novel process that uses high‐intensity ultrasonication (HIUS) to isolate fibrils from several cellulose resources. Six factors that may affect the efficiency of fibrillation, including power, temperature, time, concentration, size, and distance, have been considered and discussed. HIUS treatment can produce very strong mechanical oscillating power; therefore, the separation of cellulose fibrils from its biomass is possible by the action of hydrodynamic forces of the ultrasound. Water‐retention value and volume change were used to evaluate and optimize the process parameters. The degree of fibrillation of the cellulose fibers treated by HIUS was significantly increased. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Beck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Elastic modulus and stress-transfer properties of tunicate cellulose whiskers
Šturcová, A., Davies, G. R., & Eichhorn, S. J. (2005) · Biomacromolecules · doi:10.1021/bm049291k · Cited by 953
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Production of cellulose nanofibrils: A review of recent advances
Nechyporchuk, O., Belgacem, M. N., & Bras, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.016 · Cited by 1,687
Green composites from sustainable cellulose nanofibrils: A review
Abdul Khalil, H. P. S., Bhat, A. H., & Ireana Yusra, A. F. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.078 · Cited by 1,573
Key advances in the chemical modification of nanocelluloses
Habibi, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60204d · Cited by 1,561
Abdul Khalil, H. P. S., Davoudpour, Y., Islam, M. N., Mustapha, A., Sudesh, K., Dungani, R., & Jawaid, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.069 · Cited by 1,333
Metadata
- Authors
- Wang, S., & Cheng, Q.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2009-04-02
- Volume
- 113
- Issue
- 2
- Pages
- 1270-1275
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2068976579
- Cited by
- 249
- References
- 3
- FWCI
- 3.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.