The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Preparation and characterization of poly(vinyl alcohol) nanocomposites made from cellulose nanofibers
Abstract
A method using a combination of ball milling, acid hydrolysis, and ultrasound was developed to obtain a high yield of cellulose nanofibers from flax fibers and microcrystalline cellulose (MCC). Poly(vinyl alcohol) (PVA) nanocomposites were prepared with these additives by a solution‐casting technique. The cellulose nanofibers and nanocomposite films that were produced were characterized with Fourier transform infrared spectrometry, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy. Nanofibers derived from MCC were on average approximately 8 nm in diameter and 111 nm in length. The diameter of the cellulose nanofibers produced from flax fibers was approximately 9 nm, and the length was 141 nm. A significant enhancement of the thermal and mechanical properties was achieved with a small addition of cellulose nanofibers to the polymer matrix. Interestingly, the flax nanofibers had the same reinforcing effects as MCC nanofibers in the matrix. Dynamic mechanical analysis results indicated that the use of cellulose nanofibers (acid hydrolysis) induced a mechanical percolation phenomenon leading to outstanding and unusual mechanical properties through the formation of a rigid filler network in the PVA matrix. X‐ray diffraction showed that there was no significant change in the crystallinity of the PVA matrix with the incorporation of cellulose nanofibers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Structure and thermal properties of poly(lactic acid)/cellulose whiskers nanocomposite materials
Petersson, L., Kvien, I., & Oksman, K. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.12.012 · Cited by 576
Nanocomposites of cellulose acetate butyrate reinforced with cellulose nanocrystals
Grunert, M., & Winter, W. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021065905986 · Cited by 465
Cited by
Abdul Khalil, H. P. S., Davoudpour, Y., Islam, M. N., Mustapha, A., Sudesh, K., Dungani, R., & Jawaid, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.069 · Cited by 1,333
Review of nanocellulose for sustainable future materials
Kim, J.-H., Shim, B. S., Kim, H. S., Lee, Y.-J., Min, S.-K., Jang, D., Abas, Z., & Kim, J. (2015) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-015-0024-9 · Cited by 498
PVA, PVA Blends, and Their Nanocomposites for Biodegradable Packaging Application
Abdullah, Z. W., Dong, Y., Davies, I. J., & Barbhuiya, S. (2017) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2016.1275684 · Cited by 341
Xie, H., Du, H., Yang, X., & Si, C. (2018) · International Journal of Polymer Science · doi:10.1155/2018/7923068 · Cited by 328
Mandal, A., & Chakrabarty, D. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2013.05.003 · Cited by 267
Metadata
- Authors
- Qua, E. H., Hornsby, P. R., Sharma, H. S. S., Lyons, G., & McCall, R. D.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2009-04-27
- Volume
- 113
- Issue
- 4
- Pages
- 2238-2247
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W1983074243
- Cited by
- 184
- References
- 2
- FWCI
- 2.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.