The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Toughening of poly(L‐lactide) by melt blending with rubbers
Abstract
Poly(L‐lactide) (PLA) was melt‐blended with four rubber components—ethylene–propylene copolymer, ethylene–acrylic rubber, acrylonitrile–butadiene rubber (NBR), and isoprene rubber (IR)—in an effort to toughen PLA. All the blend samples exhibited distinct phase separation. Amorphous PLA constituted a topologically continuous matrix in which the rubber particles were dispersed. According to Izod impact testing, toughening was achieved only when PLA was blended with NBR, which showed the smallest particle size in its blend samples. In agreement with the morphological analysis, the value of the interfacial tension between the PLA phase and the NBR phase was the lowest, and this suggested that rubber with a high polarity was more suitable for toughening PLA. Under the tensile stress conditions for NBR and IR blend samples, these rubbers displayed no crosslinking and showed a high ability to induce plastic deformation before the break as well as high elongation properties; this suggested that the intrinsic mobility of the rubber was important for the dissipation of the breaking energy. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00615-3 · Cited by 258
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Liu, H., Song, W., Chen, F., Guo, L., & Zhang, J. (2011) · Macromolecules · doi:10.1021/ma1026934 · Cited by 317
Metadata
- Authors
- Ishida, S., Nagasaki, R., Chino, K., Dong, T., & Inoue, Y.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2009-03-19
- Volume
- 113
- Issue
- 1
- Pages
- 558-566
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2043260953
- Cited by
- 177
- References
- 1
- FWCI
- 5.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
