The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Thermal and mechanical properties of anhydride‐cured epoxy resins with different contents of biobased epoxidized soybean oil
Abstract
Thermosetting resins were synthesized by the partial replacement of the synthetic epoxy prepolymer based on diglycidyl ether of bisphenol A (DGEBA) with increasing amounts of epoxidized soybean oil (ESO) with methyltetrahydrophthalic anhydride as a crosslinking agent and 1‐methyl imidazole as an initiator. Calorimetric studies showed a drop in the reaction heat with ESO content; this was associated with the lower reactivity of oxirane rings in ESO due to steric constrains. The effects of the replacement of increasing amounts of synthetic DGEBA with ESO on the network properties, such as the storage modulus (E′) in the glassy and rubbery regions, glass‐transition temperature (Tg), and impact and compressive properties were examined. All formulations were transparent, although phase‐separated morphologies were evidenced by scanning electron microscopy observations. The intensity of the transmitted light passed to a minimum at a short reaction time associated with the cloud point and then increased continuously until the refractive index of the dispersed phase approximated that of the continuous phase at complete conversion. The combination of DGEBA with 40 wt % ESO resulted in a resin with an optimum set of properties; E′ in the glassy state was 93% of that of the neat DGEBA resin, Tg decreased only about 11°C, and the impact strength increased about 38% without a loss of transparency. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Plant oil renewable resources as green alternatives in polymer science
Meier, M. A. R., Metzger, J. O., & Schubert, U. S. (2007) · Chemical Society Reviews · doi:10.1039/b703294c · Cited by 1,487
Cited by
Biobased Thermosetting Epoxy: Present and Future
Auvergne, R., Caillol, S., David, G., Boutevin, B., & Pascault, J.-P. (2014) · Chemical Reviews · doi:10.1021/cr3001274 · Cited by 1,159
Metadata
- Authors
- Altuna, F. I., Espósito, L. H., Ruseckaite, R. A., & Stefani, P. M.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2010-11-03
- Volume
- 120
- Issue
- 2
- Pages
- 789-798
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2059633557
- Cited by
- 164
- References
- 2
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.