Effects of talc on the mechanical and thermal properties of polylactide
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Polylactide (PLA) composites with various talc content were prepared by melt extrusion. The thermal, dynamic mechanical, tensile and flexural properties, and fracture surface morphologies of neat PLA and PLA/talc composites were investigated and compared. The results showed that talc had significant nucleation effect and the cold crystallization temperature of PLA decreased with talc concentration. The thermal degradation and heat distortion temperature of PLA were slightly enhanced by compounding with talc. Talc showed significant reinforcing and toughening effects on PLA, the tensile strength, flexural strength and modulus increased with talc content ranging from 0 to 24.3 wt %. The results of tensile test showed that the elongation at break increased with talc content up to 18.1 wt % with obvious changes in fracture behavior, changing from brittle to ductile, when talc content increased to 24.3%, samples failed in a brittle manner with low elongation at break. The fracture surface morphologies showed that the talc layers were partially delaminated, aligned along the flow direction, and uniformly dispersed in the PLA matrix. The results obtained by SEM and FTIR confirmed that the interfacial adhesion between talc and PLA matrix was good. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607
Ray, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454
Crystallization Behavior and Morphology of Biodegradable Polylactide/Layered Silicate Nanocomposite
Nam, J. Y., Sinha Ray, S., & Okamoto, M. (2003) · Macromolecules · doi:10.1021/ma034623j · Cited by 429
New polylactide/layered silicate nanocomposites: Role of organoclays
Maiti, P., Yamada, K., Okamoto, M., Ueda, K., & Okamoto, K. (2002) · Chemistry of Materials · doi:10.1021/cm020391b · Cited by 409
Cited by
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Zhao, X., Liu, J., Li, J., Liang, X., Zhou, W., & Peng, S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.091 · Cited by 249
Self-citationNaser, A. Z., Deiab, I., Defersha, F., & Yang, S. (2021) · Polymers · doi:10.3390/polym13234271 · Cited by 180
“In another study [149], there was a substantial improvement in both the flexural modulus and strength of neat PLA with the addition of talc.”
BackgroundInfluentialMurariu, M., Dechief, A.-L., Ramy-Ratiarison, R., Paint, Y., Raquez, J.-M., & Dubois, P. (2015) · Nanocomposites · doi:10.1179/2055033214y.0000000008 · Cited by 85
Metadata
- Authors
- Yu, F., Liu, T., Zhao, X., Yu, X., Lu, A., & Wang, J.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2012-02-20
- Volume
- 125
- Issue
- S2
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2040365187
- Cited by
- 148
- References
- 7
- FWCI
- 3.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.