CoChat

Improvement in toughness and heat resistance of poly(lactic acid)/polycarbonate blend through twin‐screw blending: Influence of compatibilizer type

Open access
Wang, Y., Chiao, S. M., Hung, T.‐F., Yang, S.‐Y. · 2012 · Journal of Applied Polymer Science
Cited by 88

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Abstract

The thermal mechanical properties and morphological changes of modified poly(lactic acid) (PLA) and polycarbonate (PC) polymer blends based on the equal weight fraction of each component were investigated. Several blend samples were prepared by melt processing with a twin screw extruder using both poly(butylene succinate‐co‐lactate) (PBSL) and epoxy (EP) as compatibilizers for the PLA/PC binary system. Differential scanning calorimetry (DSC) of PLA/PBSL and PC/PBSL binary blends showed that individual components were immiscible. Scanning electron microscopy (SEM) analysis of these blends revealed the domain size of PBSL was ∼ 0.5–1 μm in PLA/PBSL blend, and reduced to around 0.1 μm in PC/PBSL blend. The notched Izod impact strength (IS) of PLA/PC/PBSL ternary blends increased with PBSL content up to 10 phr PBSL due to enhanced interfacial interaction and proper domain size of the dispersed phase on the basis of DMA, DSC, and SEM analysis. The heat deflection temperature (HDT) showed a maximum at 5 phr PBSL, and it dropped with increasing PBSL content which is a ductile polymer. However, the HDT of PLA/PC/EP ternary blends increased considerably with 10 phr EP due to rigid interphase formation, and it increased further with 1 phr quaternary amine catalyst, however, the IS dropped nearly the same as that of unmodified PLA/PC blend. To take advantage of the two compatibilizers, PBSL and EP were added to the PLA/PC blend at 10 phr each plus 1 phr catalyst and both IS and HDT were improved significantly over unmodified PLA/PC pair. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/app.36920

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 88

Metadata

Authors
Wang, Y., Chiao, S. M., Hung, T. ‐., & Yang, S. ‐.
Venue
Journal of Applied Polymer Science
Publisher
Wiley
Published
2012-04-11
Volume
125
Issue
S2
ISSN
  • 0021-8995 (ISSN-L)
  • 1097-4628
OpenAlex
W2076499431
Cited by
88
References
6
FWCI
4.27
Type
journal article
Language
en
Open access
bronze

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.