Synthesis and characterization of well‐defined random and block copolymers of ε‐caprolactone with l‐lactide as an additive for toughening polylactide: Influence of the molecular architecture
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Well‐defined multiarmed star random and block copolymers of ε‐caprolactone with l‐lactide with controlled molecular weights, low polydispersities, and precise numbers of arms were synthesized by the ring‐opening polymerization of respective cyclic ester monomers. The polymers were characterized by 1 H‐NMR and 13 C‐NMR to determine their chemical composition, molecular structure, degree of randomness, and proof of block copolymer formation. Gel permeation chromatography was used to establish the degree of branching. Star‐branched random copolymers exhibited lower glass‐transition temperatures (T g's) compared to a linear random copolymer. When the star random copolymers were melt‐blended with poly(l‐lactic acid) (PLA), we observed that the elongation of the blend increased with the number of arms of the copolymer. Six‐armed block copolymers, which exhibited higher T g's, caused the maximum improvement in elongation. In all cases, improvements in the elongation were achieved with no loss of stiffness in the PLA blends. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43267.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Cameron, D. J. A., & Shaver, M. P. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00091d · Cited by 421
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.01.003 · Cited by 217
Odent, J., Leclère, P., Raquez, J.-M., & Dubois, P. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.006 · Cited by 86
Fernández, J., Etxeberría, A., & Sarasua, J. R. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.04.003 · Cited by 40
Research works printed but not linked: 21
- Auras R., 2010, Poly(lactic acid): Synthesis, Structures, Properties, Processing and Applications;, 10.1002/9780470649848 · DOI · Paper page
- Jimenez A., 2015, Royal Society of Chemistry
- 10.1021/ma101108g · DOI · Paper page
- 10.1002/app.38568 · DOI
- 10.1021/ma4020615 · DOI
- 10.1021/ma101155p · DOI · Paper page
- 10.1016/j.eurpolymj.2011.11.002 · DOI
- 10.1016/S0032-3861(01)00150-1 · DOI · Paper page
- 10.1002/polb.23665 · DOI
- 10.1002/macp.200500546 · DOI · Paper page
- 10.1002/pola.24304 · DOI
- 10.1002/app.32590 · DOI
- 10.1021/bm050213m · DOI
- 10.1021/ma401375x · DOI · Paper page
- 10.1002/app.42213 · DOI
- 10.1039/C4PY01572J · DOI · Paper page
- 10.1016/j.ijbiomac.2014.07.004 · DOI
- 10.1002/jbm.a.34277 · DOI
- 10.2306/scienceasia1513-1874.2004.30.327 · doi:10.2306/scienceasia1513-1874.2004.30.327
- 10.1016/j.polymer.2013.03.009 · DOI
- 10.1002/adem.200800112 · DOI
Cited by
Star-shaped and branched polylactides: Synthesis, characterization, and properties
Michalski, A., Brzezinski, M., Lapienis, G., & Biela, T. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.004 · Cited by 158
Yang, D.-D., Liu, W., Zhu, H.-M., Wu, G., Chen, S.-C., Wang, X.-L., & Wang, Y.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06343 · Cited by 60
Xiang, S., Feng, L., Bian, X., Zhang, B., Sun, B., Liu, Y., Li, G., & Chen, X. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4530 · Cited by 42
Deokar, M. D., Garnaik, B., & Sivaram, S. (2022) · ACS Omega · doi:10.1021/acsomega.1c04486 · Cited by 21
Self-citationD'Auria, I., Lamberti, M., Rescigno, R., Venditto, V., & Mazzeo, M. (2021) · Heliyon · doi:10.1016/j.heliyon.2021.e07630 · Cited by 19
Metadata
- Authors
- Deokar, M. D., Idage, S. B., Idage, B. B., & Sivaram, S.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2015-12-21
- Volume
- 133
- Issue
- 14
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2552368205
- Cited by
- 25
- References
- 5
- FWCI
- 0.79
- Type
- journal article
- Language
- en
- Open access
- closed
- Funders
- Council of Scientific and Industrial Research Bhatnagar
- DST
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis and characterization of well‐defined random and block copolymers of ε‐caprolactone with l‐lactide as an additive for toughening polylactide: Influence of the molecular architecture. https://app.cochat.ai/papers/10.1002/app.43267
- The paper
- Deokar, M. D., Idage, S. B., Idage, B. B., & Sivaram, S. (2016). Synthesis and characterization of well‐defined random and block copolymers of ε‐caprolactone with l‐lactide as an additive for toughening polylactide: Influence of the molecular architecture. Journal of Applied Polymer Science. https://doi.org/10.1002/app.43267
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.