Degradation of PLA and PLA in composites with triacetin and buriti fiber after 600 days in a simulated marine environment
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Poly(lactic acid) (PLA), the polymer object of this study, degrades by a biotic process after an abiotic hydrolysis process. Its degradation was evaluated after 600 days of exposure in a simulated marine environment (SME), as buriti fiber‐reinforced composites having triacetin as coupling agent. Composites were obtained by extrusion and films were produced by compression molding. After between 60 and 600 days of exposure, PLA had a weight loss of 2.5%, PLA/T of 1.5%, and 10–12% of weight loss for PLA/B and PLA/B/T, respectively. PLA intercalates reduction, increase, and decrease of its crystallinity attributed to hydrolysis (up to 15 days), impairment of amorphous segments (45 days), and loss of integrity of the matrix (100–600 days), respectively. In the PLA/T composites, triacetin inhibited the diatom colonization process, having its crystallinity values increased after nearly 100 days of exposure with subsequent reduction. For samples with buriti fiber, changes in crystallinity were attributed to absorption of water and exposure of matrix amorphous segments. PLA degradation in a SME is evidently favored by the use of natural fibers since they make easier water access to the matrix and colonization by the protists group, diatoms, showing that the polymer can have reduced post‐use shelf life as composites, with benefits while in use and at the same time post‐use environmental benefits. Triacetin inhibits PLA colonization and degradation up to 45 days after exposure, after which it no longer influences the degradation process. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43290.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Law, K. L., & Thompson, R. C. (2014) · Science · doi:10.1126/science.1254065 · Cited by 1,471
Polymer biodegradation: Mechanisms and estimation techniques – A review
Lucas, N., Bienaime, C., Belloy, C., Queneudec, M., Silvestre, F., & Nava-Saucedo, J.-E. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.06.064 · Cited by 1,384
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
Biodegradation of poly(lactic acid) and its nanocomposites
Fukushima, K., Abbate, C., Tabuani, D., Gennari, M., & Camino, G. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.07.001 · Cited by 368
Cited by
Degradation rates of plastics in the environment
Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06635 · Cited by 3,463
Environmental performance of bio-based and biodegradable plastics: the road ahead
Lambert, S., & Wagner, M. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00149e · Cited by 838
Formation of microscopic particles during the degradation of different polymers
Lambert, S., & Wagner, M. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.07.042 · Cited by 433
A review on PLA-based biodegradable materials for biomedical applications
Hussain, M., Khan, S. M., Shafiq, M., & Abbas, N. (2024) · Giant · doi:10.1016/j.giant.2024.100261 · Cited by 326
Field and mesocosm methods to test biodegradable plastic film under marine conditions
Lott, C., Eich, A., Unger, B., Makarow, D., Battagliarin, G., Schlegel, K., Lasut, M. T., & Weber, M. (2020) · PLoS ONE · doi:10.1371/journal.pone.0236579 · Cited by 73
Metadata
- Authors
- Pelegrini, K., Donazzolo, I., Brambilla, V., Coulon Grisa, A. M., Piazza, D., Zattera, A. J., & Brandalise, R. N.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2015-12-28
- Volume
- 133
- Issue
- 15
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2231015502
- Cited by
- 52
- References
- 9
- FWCI
- 1.27
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.