Reactive modification and compatibilization of poly(lactide) and poly(butylene adipate‐co‐terephthalate) blends with epoxy functionalized‐poly(lactide) for blown film applications
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Biodegradable blown films comprising of poly(lactide) (PLA) and poly(butylene adipate‐co‐terephthalate) (PBAT) were produced using epoxy functionalized‐poly(lactide) (EF‐PLA) reactive modifiers for rheological enhancement and compatibilization. The epoxy groups on the EF‐PLA modifiers react with PBAT forming an in situ copolymer that localizes at the blend interphase resulting in compatibilization of the polymer blend components. The EF‐PLA modified polymer blends have improved melt strength and the resultant films showed better processability as seen by increased bubbled stability. This allowed for blown films with higher PLA content (70%) compared to the unmodified control films (40%). The static charge build‐up typically experienced with PLA film blowing was decreased with the inclusion of EF‐PLA yielding films with better slip and softness. The compatibilization effect of the EF‐PLA modifiers resulted in significant improvement in mechanical properties. For example, dart test performance was up to four times higher than the control, especially at higher PLA concentrations. Therefore, the rheological enhancement and compatibilization effects of the EF‐PLA reactive modifiers make them ideally suited to create high PLA content films. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2016,133, 43310.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906
Signori, F., Coltelli, M.-B., & Bronco, S. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.004 · Cited by 503
Arruda, L. C., Magaton, M., Bretas, R. E. S., & Ueki, M. M. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.02.005 · Cited by 397
Li, K., Peng, J., Turng, L., & Huang, H. (2011) · Advances in Polymer Technology · doi:10.1002/adv.20212 · Cited by 132
Cited by
Biodegradable compatibilized polymer blends for packaging applications: A literature review
Muthuraj, R., Misra, M., & Mohanty, A. K. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.45726 · Cited by 391
Degradation and Recycling of Films Based on Biodegradable Polymers: A Short Review
Scaffaro, R., Maio, A., Sutera, F., Gulino, E., & Morreale, M. (2019) · Polymers · doi:10.3390/polym11040651 · Cited by 254
Palai, B., Mohanty, S., & Nayak, S. K. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106130 · Cited by 96
He, W., Ye, L., Coates, P., Caton-Rose, F., & Zhao, X. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123980 · Cited by 23
Toughening modification of PLLA by combination of copolymerization and in situ reactive blending
Zhang, B., Bian, X., Zhou, D., Feng, L., Li, G., & Chen, X. (2016) · RSC Advances · doi:10.1039/c6ra23267a · Cited by 15
Metadata
- Authors
- Schneider, J., Manjure, S., & Narayan, R.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2016-01-13
- Volume
- 133
- Issue
- 16
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2511839357
- Cited by
- 56
- References
- 6
- FWCI
- 4.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reactive modification and compatibilization of poly(lactide) and poly(butylene adipate‐co‐terephthalate) blends with epoxy functionalized‐poly(lactide) for blown film applications. https://app.cochat.ai/papers/10.1002/app.43310
- The paper
- Schneider, J., Manjure, S., & Narayan, R. (2016). Reactive modification and compatibilization of poly(lactide) and poly(butylene adipate‐co‐terephthalate) blends with epoxy functionalized‐poly(lactide) for blown film applications. Journal of Applied Polymer Science. https://doi.org/10.1002/app.43310
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.