The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Application of expanded polystyrene (EPS) in buildings and constructions: A review
Abstract
Expanded polystyrene (EPS) is one of the building material capable of enhancing the design and structural integrity of the building. Since its recognition as conventional insulating material in 1950s, EPS has been experiencing swift progress in other new implementations. Currently, EPS is utilized in many building structures owing to its sustainability benefit and improvement in terms of energy efficiency, durability, and indoor environmental quality. This article provides an overview on the application of EPS as aggregates in lightweight concrete, decorative tiles and molding, panel application (structural insulated panels (SIPs) and composite SIPs), and embankment backfilling. Also, this article attempts to describe the properties of EPS in terms of fire behavior, mechanical properties, chemical resistant, water and moisture absorption, and their toxicity to the human and environment. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47529.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction to Fire Dynamics
Drysdale, D. (2011) · Wiley eBooks · doi:10.1002/9781119975465 · Cited by 2,598
Sayadi, A. A., Tapia, J. V., Neitzert, T. R., & Clifton, G. C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.218 · Cited by 428
Properties of lightweight expanded polystyrene concrete reinforced with steel fiber
Chen, B., & Liu, J. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.12.014 · Cited by 300
Properties of lightweight expanded polystyrene aggregate concretes containing fly ash
Daneti, S. B., Babu, K. G., & Wee, T. H. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.11.015 · Cited by 298
Alam, M., Singh, H., & Limbachiya, M. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.04.040 · Cited by 276
Mechanical properties of expanded polystyrene lightweight aggregate concrete and brick
Xu, Y., Jiang, L., Xu, J., & Li, Y. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.08.030 · Cited by 236
The effect of foam polystyrene granules on cement composite properties
Laukaitis, A., Žurauskas, R., & Kerien≐, J. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2003.09.004 · Cited by 199
International plastics flammability handbook
(1987) · Additives for Polymers · doi:10.1016/0306-3747(87)90255-7 · Cited by 191
Mechanical and drying shrinkage properties of structural-graded polystyrene aggregate concrete
Tang, W. C., Lo, Y., & Nadeem, A. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.01.002 · Cited by 181
Dissanayake, D., Jayasinghe, C., & Jayasinghe, M. T. R. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.11.044 · Cited by 170
Cited by
Worch, J. C., & Dove, A. P. (2020) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00582 · Cited by 308
Microplastic pollution in surface water of Lake Victoria
Egessa, R., Nankabirwa, A., Ocaya, H., & Pabire, W. G. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.140201 · Cited by 293
Plastic Waste Recycling─A Chemical Recycling Perspective
Schade, A., Melzer, M., Zimmermann, S., Schwarz, T., Stoewe, K., & Kuhn, H. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c02551 · Cited by 273
Vandana, & Das, S. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119536 · Cited by 199
Metadata
- Authors
- Ramli Sulong, N. H., Mustapa, S. A. S., & Abdul Rashid, M. K.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2019-01-11
- Volume
- 136
- Issue
- 20
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2909907858
- Cited by
- 320
- References
- 23
- FWCI
- 17.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.