Optimal model‐based design of the twin‐column CaptureSMB process improves capacity utilization and productivity in protein A affinity capture
The DOI matches its Crossref record.
Abstract
Multi‐column chromatographic processes have recently been developed for protein A affinity chromatography to efficiently capture monoclonal antibodies from cell culture supernatant. In this work, the novel twin‐column CaptureSMB process was compared to a batch capture process with dual loading flow rate to identify performance gains. As a case study, the isolation of a monoclonal antibody with the Amsphere JWT‐203 protein A resin was investigated. Using model based optimization, both processes were optimized and compared over a wide range of operating conditions. A trade‐off between productivity and capacity utilization was found, and the resulting pareto‐curves showed that CaptureSMB dominates batch, except at very low productivity values. With a feed titer of 1.2 mg mL−1, CaptureSMB could reach a productivity of up to 19.5 mg mL−1 h−1 experimentally, while maintaining relatively high capacity utilization of 63.8%. On the other hand, at maximum capacity utilization of 95.5%, a productivity of 10.2 mg mL−1 h−1 could be reached. This corresponds to a performance improvement with respect batch operation of about 25% in capacity utilization and 40% in productivity, for given yield and purity. CaptureSMB therefore offers a greatly increased performance over batch capture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Digital Twins in Pharmaceutical and Biopharmaceutical Manufacturing: A Literature Review
Chen, Y., Yang, O., Sampat, C., Bhalode, P., Ramachandran, R., & Ierapetritou, M. (2020) · Processes · doi:10.3390/pr8091088 · Cited by 278
Perfusion mammalian cell culture for recombinant protein manufacturing – A critical review
Bielser, J.-M., Wolf, M., Souquet, J., Broly, H., & Morbidelli, M. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.04.011 · Cited by 263
Self-citationFisher, A. C., Kamga, M.-H., Agarabi, C., Brorson, K., Lee, S. L., & Yoon, S. (2019) · Trends in Biotechnology · doi:10.1016/j.tibtech.2018.08.008 · Cited by 180
Very-large-scale production of antibodies in plants: The biologization of manufacturing
Buyel, J. F., Twyman, R. M., & Fischer, R. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2017.03.011 · Cited by 168
Feidl, F., Garbellini, S., Luna, M. F., Vogg, S., Souquet, J., Broly, H., Morbidelli, M., & Butté, A. (2019) · Processes · doi:10.3390/pr7100683 · Cited by 46
“The chromatographic process was modelled using the lumped kinetic model (LKM) [14,29]:”
MethodSelf-citationContinuous integrated manufacturing for biopharmaceuticals: A new paradigm or an empty promise?
Rathore, A. S., Thakur, G., & Kateja, N. (2023) · Biotechnology and Bioengineering · doi:10.1002/bit.28235 · Cited by 41
Metadata
- Authors
- Baur, D., Angarita, M., Müller‐Späth, T., & Morbidelli, M.
- Venue
- Biotechnology Journal
- Publisher
- Wiley
- Published
- 2015-12-18
- Volume
- 11
- Issue
- 1
- Pages
- 135-145
- ISSN
- 1860-6768 (ISSN-L)
- 1860-7314
- OpenAlex
- W2306337239
- Cited by
- 107
- References
- 0
- FWCI
- 5.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.