The DOI matches its Crossref record.
Optimization of polyhydroxybutyrate production by mixed cultures submitted to aerobic dynamic feeding conditions
Abstract
Activated sludge submitted to aerobic dynamic feeding conditions showed a good and stable capacity to store polyhydroxybutyrate (PHB). The system, working for 2 years, selected a microbial population with a high PHB storage capacity. The influence of carbon and nitrogen concentrations on the PHB accumulation yield was studied in a range of 15–180 Cmmol/l for acetate and 0–2.8 Nmmol/l for ammonia. Low ammonia concentrations favored PHB accumulation. The maximum PHB content, 67.5%, was obtained for 180 Cmmol/l of acetate supplied in one pulse. However, such high substrate concentration proved to be inhibitory for the storage mechanism, causing a slowdown of the specific PHB storage rate. In order to avoid substrate inhibition, 180 Cmmol/l of acetate was supplied in different ways: continuously fed and in three pulses of 60 Cmmol/l each. In both cases the specific PHB storage rate increased and the PHB content obtained were 56.2% and 78.5%, respectively. The latter value of PHB content is similar to that obtained by pure cultures and was never reported for mixed cultures. Addition of acetate by pulses controlled by the oxygen concentration was kept for 16 days, the PHB content being always above 70% of cell dry weight. © 2004 Wiley Periodicals, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The Chemomechanical Properties of Microbial Polyhydroxyalkanoates
Laycock, B., Halley, P., Pratt, S., Werker, A., & Lant, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.003 · Cited by 604
Producing microbial polyhydroxyalkanoate (PHA) biopolyesters in a sustainable manner
Koller, M., Maršálek, L., de Sousa Dias, M. M., & Braunegg, G. (2017) · New Biotechnology · doi:10.1016/j.nbt.2016.05.001 · Cited by 532
Albuquerque, M. G. E., Eiroa, M., Torres, C., Nunes, B. R., & Reis, M. A. M. (2007) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2007.05.011 · Cited by 394
Self-citationProduction of polyhydroxyalkanoates by activated sludge treating a paper mill wastewater
Bengtsson, S., Werker, A., Christensson, M., & Welander, T. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.01.020 · Cited by 374
Strategies for PHA production by mixed cultures and renewable waste materials
Serafim, L. S., Lemos, P. C., Albuquerque, M. G. E., & Reis, M. A. M. (2008) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-008-1757-y · Cited by 352
Self-citationAlbuquerque, M. G. E., Torres, C. A. V., & Reis, M. A. M. (2010) · Water Research · doi:10.1016/j.watres.2010.03.021 · Cited by 334
Self-citationPoly(3-Hydroxybutyrate-co-3-Hydroxyvalerate): Enhancement Strategies for Advanced Applications
Rivera-Briso, A. L., & Serrano-Aroca, Á. (2018) · Polymers · doi:10.3390/polym10070732 · Cited by 332
Lemos, P. C., Serafim, L. S., & Reis, M. A. M. (2006) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2005.09.006 · Cited by 273
Self-citationJones, R. J., Fernández-Feito, R., Massanet-Nicolau, J., Dinsdale, R., & Guwy, A. (2021) · Waste Management · doi:10.1016/j.wasman.2020.12.032 · Cited by 54
Metadata
- Authors
- Serafim, L. S., Lemos, P. C., Oliveira, R., & Reis, M. A. M.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 2004-06-22
- Volume
- 87
- Issue
- 2
- Pages
- 145-160
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W2152902369
- Cited by
- 374
- References
- 0
- FWCI
- 4.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.