The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells
Abstract
Thermal inkjet printing technology has been applied successfully to cell printing. However, there are concerns that printing process may cause cell damages or death. We conducted a comprehensive study of thermal inkjet printed Chinese hamster ovary (CHO) cells by evaluating cell viability and apoptosis, and possible cell membrane damages. Additionally, we studied the cell concentration of bio‐ink and found optimum printing of concentrations around 8 million cells per mL. Printed cell viability was 89% and only 3.5% apoptotic cells were observed after printing. Transient pores were developed in the cell membrane of printed cells. Cells were able to repair these pores within 2 h after printing. Green fluorescent protein (GFP) DNA plasmids were delivered to CHO‐S cells by co‐printing. The transfection efficiency is above 30%. We conclude that thermal inkjet printing technology can be used for precise cell seeding with minor effects and damages to the printed mammalian cells. The printing process causes transient pores in cell membranes, a process which has promising applications for gene and macroparticles delivery to induce the biocompatibility or growth of engineered tissues. Biotechnol. Bioeng. 2010;106: 963–969. © 2010 Wiley Periodicals, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Self-citationApplication of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Self-citationInkjet printing for high-throughput cell patterning
Roth, E. A., Xu, T., Das, M., Gregory, C., Hickman, J. J., & Boland, T. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.052 · Cited by 714
Self-citationHuman microvasculature fabrication using thermal inkjet printing technology
Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 704
Self-citationThe role of DNA fragmentation in apoptosis
Bortner, C. D., Oldenburg, N. B. E., & Cidlowski, J. A. (1995) · Trends in Cell Biology · doi:10.1016/s0962-8924(00)88932-1 · Cited by 608
Cell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
Self-citationViability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Self-citationThree-dimensional tissue fabrication
Liu Tsang, V., & Bhatia, S. N. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2004.05.001 · Cited by 519
Engineering biological structures of prescribed shape using self-assembling multicellular systems
Jakab, K., Neagu, A., Mironov, V., Markwald, R. R., & Forgacs, G. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0400164101 · Cited by 394
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Metadata
- Authors
- Cui, X., Dean, D., Ruggeri, Z. M., & Boland, T.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 2010-06-29
- Volume
- 106
- Issue
- 6
- Pages
- 963-969
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W2088660377
- Cited by
- 364
- References
- 17
- FWCI
- 6.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells. https://app.cochat.ai/papers/10.1002/bit.22762
- The paper
- Cui, X., Dean, D., Ruggeri, Z. M., & Boland, T. (2010). Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells. Biotechnology and Bioengineering. https://doi.org/10.1002/bit.22762
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.