Photobioreactor design for isotopic non‐stationary 13C‐metabolic flux analysis (INST 13C‐MFA) under photoautotrophic conditions
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Adaptive metabolic behavior of photoautotrophic microorganisms toward genetic and environmental perturbations can be interpreted in a quantitative depiction of carbon flow through a biochemical reaction network using isotopic non‐stationary 13 C‐metabolic flux analysis (INST 13 C‐MFA). To evaluate 13 C‐metabolic flux maps for Chlamydomonas reinhardtii, an original experimental framework was designed allowing rapid, reliable collection of high‐quality isotopomer data against time. It involved (i) a short‐time 13 C labeling injection device based on mixing control in a torus‐shaped photobioreactor with plug‐flow hydrodynamics allowing a sudden step‐change in the 13 C proportion in the substrate feed and (ii) a rapid sampling procedure using an automatic fast filtration method coupled to a manual rapid liquid nitrogen quenching step. 13 C‐substrate labeling enrichment was controlled through the total dissolved inorganic carbon concentration in the pulsed solution. First results were obtained from steady‐state continuous culture measurements allowing the characterization of the kinetics of label incorporation into light‐limited growing cells cultivated in a photobioreactor operating at the maximal biomass productivity for an incident photon flux density of 200 µmol m−2 s−1. 13 C label incorporation was measured for 21 intracellular metabolites using IC‐MS/MS in 58 samples collected across a labeling experiment duration of 7 min. The fastest labeling rate was observed for 2/3‐phosphoglycerate with an apparent isotopic stationary state reached after 300 s. The labeling rate was consistent with the optimized mixing time of about 4.9 s inside the reactor and the shortest reliable sampling period assessed at 5 s. Biotechnol. Bioeng. 2012; 109: 3030–3040. © 2012 Wiley Periodicals, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pottier, L., Pruvost, J., Deremetz, J., Cornet, J. ‐., Legrand, J., & Dussap, C. G. (2005) · Biotechnology and Bioengineering · doi:10.1002/bit.20475 · Cited by 239 · cited 3×
“1) illuminated on one side, already described elsewhere (Fouchard et al., 2008; Pottier et al., 2005; Pruvost et al., 2006).”
BackgroundMethodSelf-citationNumerical investigation of hydrodynamic and mixing conditions in a torus photobioreactor
Pruvost, J., Pottier, L., & Legrand, J. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.02.027 · Cited by 154 · cited 4×
“1) illuminated on one side, already described elsewhere (Fouchard et al., 2008; Pottier et al., 2005; Pruvost et al., 2006).”
BackgroundMethodInfluentialSelf-citation
Cited by
A review on photobioreactor design and modelling for microalgae production
Legrand, J., Artu, A., & Pruvost, J. (2021) · Reaction Chemistry & Engineering · doi:10.1039/d0re00450b · Cited by 125
Self-citationIndustrial Photobioreactors and Scale-Up Concepts
Pruvost, J., Le Borgne, F., Artu, A., Cornet, J.-F., & Legrand, J. (2016) · Advances in Chemical Engineering · doi:10.1016/bs.ache.2015.11.002 · Cited by 75
“Another example of the use of the torus-shaped PBR can be found in Martzolff et al (2012).”
MethodSelf-citationPowerful tools for productivity improvements in microalgal production
Sun, H., Wu, T., Chen, S. H. Y., Ren, Y., Yang, S., Huang, J., Mou, H., & Chen, F. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111609 · Cited by 42
Bouillaud, D., Drouin, D., Charrier, B., Jacquemmoz, C., Farjon, J., Giraudeau, P., & Gonçalves, O. (2020) · Process Biochemistry · doi:10.1016/j.procbio.2020.03.016 · Cited by 35
Self-citationRemize, M., Planchon, F., Loh, A. N., Le Grand, F., Bideau, A., Le Goic, N., Fleury, E., Miner, P., Corvaisier, R., Volety, A., et al. (2020) · Biomolecules · doi:10.3390/biom10050797 · Cited by 27
Metadata
- Authors
- Martzolff, A., Cahoreau, E., Cogne, G., Peyriga, L., Portais, J., Dechandol, E., Le Grand, F., Massou, S., Gonçalves, O., Pruvost, J., & Legrand, J.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 2012-06-27
- Volume
- 109
- Issue
- 12
- Pages
- 3030-3040
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W2153720780
- Cited by
- 25
- References
- 2
- FWCI
- 1.05
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.