Optimization of microalgal production in a shallow outdoor flume
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The marine diatom Cyclotella cryptica was grown over a period of 13 months in a 48‐m 2 shallow outdoor flume. The use of foil arrays at intervals of 1.2 m to effect systematic vertical mixing in the flume was found to significantly enhance microalgal production (p = 0.006). Average photosynthetic efficiencies (based on visible irradiance) with and without the foil arrays in place were 9.6 ± 0.8 and 7.5 ± 0.5% (±95% confidence intervals), respectively. A cost–benefit analysis indicated that the foil arrays were cost‐effective if the value of the algae exceeded about $2.28 kg 1 of ash‐free dry weight (AFDW). Parallel experiments performed in four 9.2‐m 2 flumes showed that production was maximized when the cells were grown on a 2‐day batch cycle between harvests rather than on a 1‐ or 3‐day batch cycle. The optimum initial concentration (immediately after harvesting) of the algae was negatively correlated with the time interval between harvests and ranged from approximately 39 g AFDW/m 3 on a 3‐day cycle to 213 g AFDW/m 3 on a 1‐day cycle. The increase in production resulting from growth on a 2‐day rather than a 1‐day batch cycle was about 19% and was statistically significant at p = 0.0003. Growth of C. cryptica over a total period of 122 days during the 13‐month study in the 48‐m 2 flume under near‐optimal conditions (2‐day batch cycle, initial concentration 155 g AFDW/m 3) resulted in an average production rate (±95% confidence interval) of 29.7 ± 2.7 g AFDW/m 2 d.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A RAPID METHOD OF TOTAL LIPID EXTRACTION AND PURIFICATION
Bligh, E. G., & Dyer, W. J. (1959) · Canadian Journal of Biochemistry and Physiology · doi:10.1139/o59-099 · Cited by 54,751
A SEPARATION OF THE REACTIONS IN PHOTOSYNTHESIS BY MEANS OF INTERMITTENT LIGHT
Emerson, R., & Arnold, W. (1932) · Journal of General Physiology · doi:10.1085/jgp.15.4.391 · Cited by 432
Cited by
Wastewater treatment high rate algal ponds for biofuel production
Park, J. B. K., Craggs, R. J., & Shilton, A. N. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.158 · Cited by 1,097
Microalgal Reactors: A Review of Enclosed System Designs and Performances
Carvalho, A. P., Meireles, L. A., & Malcata, F. X. (2006) · Biotechnology Progress · doi:10.1002/bp060065r · Cited by 938
Tubular photobioreactor design for algal cultures
Molina, E., Fernández, J., Acién, F. G., & Chisti, Y. (2001) · Journal of Biotechnology · doi:10.1016/s0168-1656(01)00353-4 · Cited by 620
Acién Fernández, F. G., Fernández Sevilla, J. M., Sánchez Pérez, J. A., Molina Grima, E., & Chisti, Y. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00521-2 · Cited by 310
Qiang, H., & Richmond, A. (1996) · Journal of Applied Phycology · doi:10.1007/bf02186317 · Cited by 258
Metadata
- Authors
- Laws, E. A., Taguchi, S., Hirata, J., & Pang, L.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 1988-07-05
- Volume
- 32
- Issue
- 2
- Pages
- 140-147
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W2005951790
- Cited by
- 49
- References
- 2
- FWCI
- 2.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.