Liquid‐Phase mass transfer coefficients in bioreactors
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Liquid‐phase mass transfer coefficient in bioreactors have been examined. A theoretical model based on the surface renewal concept has been devloped. The predicted liquid‐phase mass transfer coefficients are compared with the experimental data for a mycelial fermentation broth (Chaetomium cellulolyticum) and model media (carboxymethyl cellulose) in a bench‐scale bubble column reactor. The liquid‐phase mass transfer coefficient is evaluated by dividing the volumetric mass transfer coefficient obtained experimentally by the specific surface area estimated using the available correlations. The available literature data in bubble column and stirred tank bioreactors is also used to test the validity of the proposed model. A reasonable agreement between the model and the experimental data is found.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design parameters estimations for bubble column reactors
Shah, Y. T., Kelkar, B. G., Godbole, S. P., & Deckwer, W. ‐. (1982) · AIChE Journal · doi:10.1002/aic.690280302 · Cited by 1,202
The continuous phase heat and mass-transfer properties of dispersions
Calderbank, P. H., & Moo-Young, M. B. (1961) · Chemical Engineering Science · doi:10.1016/0009-2509(61)87005-x · Cited by 846
Self-citationKawase, Y., Halard, B., & Moo-Young, M. (1987) · Chemical Engineering Science · doi:10.1016/0009-2509(87)80165-3 · Cited by 224
Self-citationGas Absorption by Newtonian and Non-Newtonian Liquids in a Bubble Column
Nakanoh, M., & Yoshida, F. (1980) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i260073a033 · Cited by 217
Cited by
Bioreactor scale-up and oxygen transfer rate in microbial processes: An overview
Garcia-Ochoa, F., & Gomez, E. (2009) · Biotechnology Advances · doi:10.1016/j.biotechadv.2008.10.006 · Cited by 1,504
Oxygen uptake rate in microbial processes: An overview
Garcia-Ochoa, F., Gomez, E., Santos, V. E., & Merchuk, J. C. (2010) · Biochemical Engineering Journal · doi:10.1016/j.bej.2010.01.011 · Cited by 511
Modeling method for combining fluid dynamics and algal growth in a bubble column photobioreactor
Nauha, E. K., & Alopaeus, V. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.065 · Cited by 71
Modeling outdoors algal cultivation with compartmental approach
Nauha, E. K., & Alopaeus, V. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.073 · Cited by 18
Metadata
- Authors
- Kawase, Y., Halard, B., & Moo‐Young, M.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 1992-05
- Volume
- 39
- Issue
- 11
- Pages
- 1133-1140
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W2047705017
- Cited by
- 155
- References
- 4
- FWCI
- 2.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.