The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Biological sulphate reduction using gas‐lift reactors fed with hydrogen and carbon dioxide as energy and carbon source
Abstract
Feasibility and engineering aspects of biological sulphate reduction in gas‐lift reactors were studied. Hydrogen and carbon dioxide were used as energy and carbon source. Attention was paid to biofilm formation, sulphide toxicity, sulphate conversion rate optimization, and gasliquid mass transfer limitations. Sulphate‐reducing bacteria formed stable biofilms on pumice particles. Biofilm formation was not observed when basalt particles were used. However, use of basalt particles led to the formation of granules of sulphate‐reducing biomass. The sulphate‐reducing bacteria, grown on pumice, easily adapted to free H 2 S concentrations up to 450 mg/L. Biofilm growth rate then equilibrated biomass loss rate. These high free H 2 S concentrations caused reversible inhibition rather than acute toxicity. When free H 2 S concentrations were kept below 450 mg/L, a maximum sulphate conversion rate of 30 g SO 42−/L · d could be achieved after only 10 days of operation. Gas‐to‐liquid hydrogen mass transfer capacity of the reactor determined the maximum sulphate conversion rate. © 1994 John Wiley & Sons, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The role of bacterial cell wall hydrophobicity in adhesion
van Loosdrecht, M. C., Lyklema, J., Norde, W., Schraa, G., & Zehnder, A. J. (1987) · Applied and Environmental Microbiology · doi:10.1128/aem.53.8.1893-1897.1987 · Cited by 959
Cited by
Remediation technologies for heavy metal contaminated groundwater
Hashim, M. A., Mukhopadhyay, S., Sahu, J. N., & Sengupta, B. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2011.06.009 · Cited by 961
Wastewater treatment with particulate biofilm reactors
Nicolella, C. (2000) · Journal of Biotechnology · doi:10.1016/s0168-1656(00)00229-7 · Cited by 497
A review of biological sulfate conversions in wastewater treatment
Hao, T.-W., Xiang, P.-Y., Mackey, H. R., Chi, K., Lu, H., Chui, H.-K., van Loosdrecht, M. C. M., & Chen, G.-H. (2014) · Water Research · doi:10.1016/j.watres.2014.06.043 · Cited by 417
Sulfur-oxidizing bacteria in environmental technology
Pokorna, D., & Zabranska, J. (2015) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.02.007 · Cited by 414
Sulfate reduction at low pH to remediate acid mine drainage
Sánchez-Andrea, I., Sanz, J. L., Bijmans, M. F. M., & Stams, A. J. M. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.12.032 · Cited by 385
Metadata
- Authors
- van Houten, R. T., Pol, L. W. H., & Lettinga, G.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 1994-08-20
- Volume
- 44
- Issue
- 5
- Pages
- 586-594
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W2003734232
- Cited by
- 194
- References
- 1
- FWCI
- 13.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.