Optimization of the Reaction Conditions for Catalytic Fast Pyrolysis of Pretreated Lignin over Zeolite for the Production of Phenol
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
The catalytic fast pyrolysis of lignin for the production of phenols over commercial zeolites was studied in‐depth. The results show that the production of phenols depended on several parameters, such as lignin pretreatment methods, pyrolysis temperature, zeolite structure and acidity, pyrolysis time, and feed‐to‐catalyst weight ratio. Lignin pretreatments had a significant influence on the liquid‐product distribution. Hydrogen chloride pretreatment of lignin increased the depolymerization of the lignin matrix, resulting in an increase of the liquid yield, as well as the phenol fraction. High temperature (e.g., 650 °C) and a fast heating rate (20 °C ms−1) were required to depolymerize lignin and increase the yield of liquid products, and large‐pore‐size zeolites (e.g., FAU) with Si/Al of approximately 15 favored the formation of phenols. A long pyrolysis time (20 s) was also beneficial for phenol to desorb from the catalyst. The medium feed‐to‐catalyst weight ratio of approximately 1:1 prevented further conversion of phenols to deoxygenated products such as aromatic hydrocarbons (benzene, toluene, and xylene).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
Li, C., Zhao, X., Wang, A., Huber, G. W., & Zhang, T. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00155 · Cited by 2,951
Screening acidic zeolites for catalytic fast pyrolysis of biomass and its components
Mihalcik, D. J., Mullen, C. A., & Boateng, A. A. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.06.001 · Cited by 513
Controlling the selectivity to chemicals from lignin via catalytic fast pyrolysis
Ma, Z., Troussard, E., & van Bokhoven, J. A. (2012) · Applied Catalysis A: General · doi:10.1016/j.apcata.2012.02.027 · Cited by 363
Self-citationLignin depolymerization into aromatic monomers over solid acid catalysts
Deepa, A. K., & Dhepe, P. L. (2015) · ACS Catalysis · doi:10.1021/cs501371q · Cited by 346
Effect of the Temperature on the Composition of Lignin Pyrolysis Products
Jiang, G., Nowakowski, D. J., & Bridgwater, A. V. (2010) · Energy & Fuels · doi:10.1021/ef100363c · Cited by 332
Screening heterogeneous catalysts for the pyrolysis of lignin
Jackson, M. A., Compton, D. L., & Boateng, A. A. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.09.016 · Cited by 187
Selective deoxygenation of lignin during catalytic fast pyrolysis
Ma, Z., Custodis, V., & van Bokhoven, J. A. (2014) · Catalysis Science & Technology · doi:10.1039/c3cy00704a · Cited by 105
Self-citation
Cited by
From lignin to valuable products–strategies, challenges, and prospects
Wang, H., Pu, Y., Ragauskas, A., & Yang, B. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2018.09.072 · Cited by 922
Advances in porous and nanoscale catalysts for viable biomass conversion
Sudarsanam, P., Peeters, E., Makshina, E. V., Parvulescu, V. I., & Sels, B. F. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00452h · Cited by 643
Bio-oil from fast pyrolysis of lignin: Effects of process and upgrading parameters
Fan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P., Cheng, Y., Addy, M., Lu, Q., Omar, M. M., Liu, Y., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.129 · Cited by 265
Jampa, S., Puente-Urbina, A., Ma, Z., Wongkasemjit, S., Luterbacher, J. S., & van Bokhoven, J. A. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05498 · Cited by 45
Self-citationKim, J.-Y., & Choi, J. W. (2019) · Fuel · doi:10.1016/j.fuel.2018.11.116 · Cited by 38
Metadata
- Authors
- Ma, Z., Ghosh, A., Asthana, N., & van Bokhoven, J.
- Venue
- ChemCatChem
- Publisher
- Wiley
- Published
- 2017-03-06
- Volume
- 9
- Issue
- 6
- Pages
- 954-961
- ISSN
- 1867-3880 (ISSN-L)
- 1867-3899
- OpenAlex
- W2577903584
- Cited by
- 41
- References
- 7
- FWCI
- 2.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.