Between the Poles of Data‐Driven and Mechanistic Modeling for Process Operation
The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Abstract
The best method for process control is the use of model‐based solutions, based on process analytical technology for online monitoring of critical process variables, product quality attributes, or a holistic process state estimation. Mechanistic models as well as data‐driven techniques are essential for real‐time process monitoring. Their main characteristics, advantages and disadvantages, and the link between both are discussed as well as the synergetic effects, benefits, and drawbacks resulting from their combination. Aspects and differences of the computational model life cycle management are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Unlike model-driven estimators, data-driven estimators do not require as much time for implementation as long as the data is available (Solle et al. 2017).”
From Software sensors in the monitoring of microalgae cultivations (2024) · cites this paper as Solle et al. 2017
In the citing paper
“Generally, these models have a wider range of application than data-driven estimators because of their greater extrapolation power (Solle et al. 2017).”
From Software sensors in the monitoring of microalgae cultivations (2024) · cites this paper as Solle et al. 2017
Citations
Cites
A survey of industrial model predictive control technology
Qin, S. J., & Badgwell, T. A. (2003) · Control Engineering Practice · doi:10.1016/s0967-0661(02)00186-7 · Cited by 5,099
Ljung, L. (1999) · Wiley Encyclopedia of Electrical and Electronics Engineering · doi:10.1002/047134608x.w1046 · Cited by 3,778
THE GROWTH OF BACTERIAL CULTURES
Monod, J. (1949) · Annual Review of Microbiology · doi:10.1146/annurev.mi.03.100149.002103 · Cited by 3,707
Shampine, L. F., & Reichelt, M. W. (1997) · SIAM Journal on Scientific Computing · doi:10.1137/s1064827594276424 · Cited by 3,599
Box, G. E. P. (1976) · Journal of the American Statistical Association · doi:10.1080/01621459.1976.10480949 · Cited by 2,114
The IκB-NF-κB Signaling Module: Temporal Control and Selective Gene Activation
Hoffmann, A., Levchenko, A., Scott, M. L., & Baltimore, D. (2002) · Science · doi:10.1126/science.1071914 · Cited by 1,858
Systematic Methods of Chemical Process Design
Biegler, L. T., Grossmann, I. E., & Westerberg, A. W. (1997) · Cited by 1,675
Systematic Methods of Chemical Process Design
Biegler, L. T., Grossmann, I. E., & Westerberg, A. W. (1997) · Medical Entomology and Zoology · Cited by 1,388
How to avoid a perfunctory sensitivity analysis
Saltelli, A., & Annoni, P. (2010) · Environmental Modelling & Software · doi:10.1016/j.envsoft.2010.04.012 · Cited by 974
Fungal morphology and metabolite production in submerged mycelial processes
Papagianni, M. (2004) · Biotechnology Advances · doi:10.1016/j.biotechadv.2003.09.005 · Cited by 898
Research works printed but not linked: 4
- Günther M., 2014, Mathematische Modellbildung und Simulation: Eine Einführung für Wissenschaftler, Ingenieure und Ökonomen
- Boudreau M. A., 2007, New Directions in Bioprocess Modeling and Control
- Youngblood S. M., 2000, Johns Hopkins APL Tech. Dig., 21, 359
- Cook D., 2005, CrossTalk, 18, 20
Cited by
Integrating Scientific Knowledge with Machine Learning for Engineering and Environmental Systems
Willard, J., Jia, X., Xu, S., Steinbach, M., & Kumar, V. (2023) · ACM Computing Surveys · doi:10.1145/3514228 · Cited by 878
Integrating Physics-Based Modeling with Machine Learning: A Survey
Willard, J., Jia, X., Xu, S., Steinbach, M. S., & Kumar, V. (2020) · Cited by 435
Recent trends on hybrid modeling for Industry 4.0
Sansana, J., Joswiak, M. N., Castillo, I., Wang, Z., Rendall, R., Chiang, L. H., & Reis, M. S. (2021) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2021.107365 · Cited by 296
Machine learning for biochemical engineering: A review
Mowbray, M., Savage, T., Wu, C., Song, Z., Cho, B. A., Del Rio-Chanona, E. A., & Zhang, D. (2021) · Biochemical Engineering Journal · doi:10.1016/j.bej.2021.108054 · Cited by 188
Microbioreactor Systems for Accelerated Bioprocess Development
Hemmerich, J., Noack, S., Wiechert, W., & Oldiges, M. (2018) · Biotechnology Journal · doi:10.1002/biot.201700141 · Cited by 169
Optimization and Scale-Up of Fermentation Processes Driven by Models
Du, Y., Wang, M.-Y., Yang, L., Tong, L., Guo, D., & Ji, X. (2022) · Bioengineering · doi:10.3390/bioengineering9090473 · Cited by 152
Kovacs, D. J., Li, Z., Baetz, B. W., Hong, Y., Donnaz, S., Zhao, X., Zhou, P., Ding, H. H., & Dong, Q. (2022) · Journal of Membrane Science · doi:10.1016/j.memsci.2022.120817 · Cited by 145
Challenges and opportunities in biopharmaceutical manufacturing control
Hong, M. S., Severson, K., Jiang, M., Lu, A. E., Love, J. C., & Braatz, R. D. (2017) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2017.12.007 · Cited by 139
Tsopanoglou, A., & Jiménez del Val, I. (2021) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2021.100691 · Cited by 107
Narayanan, H., Sokolov, M., Morbidelli, M., & Butté, A. (2019) · Biotechnology and Bioengineering · doi:10.1002/bit.27097 · Cited by 122
Digital Twin Applications in the Water Sector: A Review
Bam, P. G., Rezaei, N., Roubanis, A., Austin, D. M., Austin, E. S., Tarroja, B., Takacs, I., Villez, K., & Rosso, D. (2025) · Water · doi:10.3390/w17202957 · Cited by 132
Machine learning for industrial sensing and control: A survey and practical perspective
Lawrence, N. P., Damarla, S. K., Kim, J. W., Tulsyan, A., Amjad, F., Wang, K., Chachuat, B., Lee, J. M., Huang, B., & Gopaluni, R. B. (2024) · Control Engineering Practice · doi:10.1016/j.conengprac.2024.105841 · Cited by 124
Khuat, T. T., Bassett, R., Otte, E. A., Grevis-James, A., & Gabryś, B. (2024) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2024.108585 · Cited by 108
Feidl, F., Vogg, S., Wolf, M., Podobnik, M., Ruggeri, C., Ulmer, N., Wälchli, R., Souquet, J., Broly, H., Butté, A., et al. (2020) · Biotechnology and Bioengineering · doi:10.1002/bit.27296 · Cited by 106
Challenges in the Development of Soft Sensors for Bioprocesses: A Critical Review
Brunner, V., Siegl, M., Geier, D., & Becker, T. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.722202 · Cited by 100
Narayanan, H., Behle, L., Luna, M. F., Sokolov, M., Guillén‐Gosálbez, G., Morbidelli, M., & Butté, A. (2020) · Biotechnology and Bioengineering · doi:10.1002/bit.27437 · Cited by 89
Current and future requirements to industrial analytical infrastructure—part 2: smart sensors
Eifert, T., Eisen, K., Maiwald, M., & Herwig, C. (2020) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-020-02421-1 · Cited by 87
Self-citationMahanty, B. (2023) · Biotechnology and Bioengineering · doi:10.1002/bit.28503 · Cited by 80
Mechanistic modeling and applications for CHO cell culture development and production
Sha, S., Huang, Z., Wang, Z., & Yoon, S. (2018) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2018.08.010 · Cited by 61
Integration and digitalization in the manufacturing of therapeutic proteins
Narayanan, H., Sponchioni, M., & Morbidelli, M. (2021) · Chemical Engineering Science · doi:10.1016/j.ces.2021.117159 · Cited by 67
Modern Machine Learning Tools for Monitoring and Control of Industrial Processes: A Survey
Gopaluni, R. B., Tulsyan, A., Chachuat, B., Huang, B., Lee, J. M., Amjad, F., Damarla, S. K., Kim, J. W., & Lawrence, N. P. (2020) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2020.12.126 · Cited by 65
The use of predictive models to develop chromatography-based purification processes
Bernau, C. R., Knödler, M., Emonts, J., Jäpel, R., & Buyel, J. F. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.1009102 · Cited by 62
Investigating ‘greyness’ of hybrid model for bioprocess predictive modelling
Rogers, A. W., Song, Z., Vega‐Ramon, F., Jing, K., & Zhang, D. (2022) · Biochemical Engineering Journal · doi:10.1016/j.bej.2022.108761 · Cited by 62
A hybrid mechanistic-empirical model for in silico mammalian cell bioprocess simulation
O’Brien, C. M., Zhang, Q., Daoutidis, P., & Hu, W. (2021) · Metabolic Engineering · doi:10.1016/j.ymben.2021.03.016 · Cited by 60
Narayanan, H., Luna, M. F., Sokolov, M., Arosio, P., Butté, A., & Morbidelli, M. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c01317 · Cited by 60
Niu, C., Li, B., & Wang, Z. (2023) · Journal of Membrane Science · doi:10.1016/j.memsci.2023.122076 · Cited by 59
About Model Validation in Bioprocessing
Rajamanickam, V., Babel, H., Herrera, L. M., Ehsani, A., Stiefel, F., Haider, S., Presser, B., & Knapp, B. L. (2021) · Processes · doi:10.3390/pr9060961 · Cited by 56
Narayanan, H., Bournazou, M. N. C., Guillén‐Gosálbez, G., & Butté, A. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133032 · Cited by 56
Narayanan, H., Luna, M. F., Sokolov, M., Butté, A., & Morbidelli, M. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c04507 · Cited by 53
Bayer, B., Duerkop, M., Pörtner, R., & Möller, J. (2022) · Biotechnology Journal · doi:10.1002/biot.202200381 · Cited by 52
Advances in bioreactor control for production of biotherapeutic products
Nikita, S., Mishra, S., Gupta, K., Runkana, V., Gomes, J., & Rathore, A. S. (2023) · Biotechnology and Bioengineering · doi:10.1002/bit.28346 · Cited by 52
Rathore, A. S., Nikita, S., & Jesubalan, N. G. (2022) · Biosensors and Bioelectronics X · doi:10.1016/j.biosx.2022.100263 · Cited by 51
Yang, Z., Muhayodin, F., Larsen, O. C., Miao, H., Xue, B., & Rotter, V. S. (2021) · Processes · doi:10.3390/pr9030473 · Cited by 49
Software sensors in the monitoring of microalgae cultivations
Porras Reyes, L., Havlik, I., & Beutel, S. (2024) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-023-09679-8 · Cited by 48
“…representations (e.g., artificial neural network(ANN)) and chemometric tools (e.g., principal component analysis (PCA), partial least squares (PLS), and principal component regression(PCR)) in order to obtain values of relevant process variables obtained from the data (Solle et al. 2017).”
InfluentialBayer, B., Duerkop, M., Striedner, G., & Sissolak, B. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.740215 · Cited by 41
Machine Learning: A Suitable Method for Biocatalysis
Sampaio, P., & Fernandes, P. C. D. B. (2023) · Catalysts · doi:10.3390/catal13060961 · Cited by 42
Bayesian machine learning for virtual flow metering
Sandnes, A. T. (2024) · NORA - Norwegian Open Research Archives · Cited by 40
Chu, K. H. (2022) · Separation and Purification Reviews · doi:10.1080/15422119.2022.2039196 · Cited by 39
Developing a Hybrid Data-Driven, Mechanistic Virtual Flow Meter - a Case Study
Hotvedt, M., Grimstad, B., & Imsland, L. (2020) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2020.12.663 · Cited by 37
Finite element models: A road to in-silico modeling in the age of personalized dentistry
Lahoud, P., Faghihian, H., Richert, R., Jacobs, R., & EzEldeen, M. (2024) · Journal of Dentistry · doi:10.1016/j.jdent.2024.105348 · Cited by 35
Recent advances to accelerate purification process development: A review with a focus on vaccines
Keulen, D., Geldhof, G., Bussy, O. L., Pabst, M., & Ottens, M. (2022) · Journal of Chromatography A · doi:10.1016/j.chroma.2022.463195 · Cited by 33
A compartment model for risk-based monitoring of lactic acid bacteria cultivations
Spann, R., Gernaey, K. V., & Sin, G. (2019) · Biochemical Engineering Journal · doi:10.1016/j.bej.2019.107293 · Cited by 33
Modeling and Simulation of 3D Food Printing Systems—Scope, Advances, and Challenges
Raja, V., Nimbkar, S., Moses, J. A., Sinija, V. R., & Anandharamakrishnan, C. (2023) · Foods · doi:10.3390/foods12183412 · Cited by 31
A model-based approach towards accelerated process development: A case study on chromatography
Sachio, S., Kontoravdi, C., & Papathanasiou, M. M. (2023) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2023.08.016 · Cited by 30
Nagel‐Held, J., Kaiser, L., Longin, C. F. H., & Hitzmann, B. (2022) · Cereal Chemistry · doi:10.1002/cche.10540 · Cited by 29
Self-citationAdvances in Polyethylene Terephthalate Beverage Bottle Optimization: A Mini Review
Ge‐Zhang, S., Liu, H., Song, M., Wang, Y., Yang, H. W., Fan, H., Ding, Y., & Mu, L. (2022) · Polymers · doi:10.3390/polym14163364 · Cited by 27
Monitoring and control of E. coli cell integrity
Kastenhofer, J., Rajamanickam, V., Libiseller-Egger, J., & Spadiut, O. (2021) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2021.01.009 · Cited by 26
Smart batch process: The evolution from 1D and 2D to new 3D perspectives in the era of Big Data
Zhou, Y., & Gao, F. (2023) · Journal of Process Control · doi:10.1016/j.jprocont.2023.103088 · Cited by 26
Rydal, T., Frandsen, J. R., Nadal‐Rey, G., Albæk, M. O., & Ramin, P. (2024) · Biotechnology and Bioengineering · doi:10.1002/bit.28670 · Cited by 25
Zhou, Y., Wang, K., Zhang, Y., Liang, D., & Li, J. (2024) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.25562 · Cited by 24
On gray-box modeling for virtual flow metering
Hotvedt, M., Grimstad, B., Ljungquist, D., & Imsland, L. (2021) · Control Engineering Practice · doi:10.1016/j.conengprac.2021.104974 · Cited by 24
rAAV Manufacturing: The Challenges of Soft Sensing during Upstream Processing
Iglesias, C. F., Ristovski, M., Bolić, M., & Čuperlović‐Culf, M. (2023) · Bioengineering · doi:10.3390/bioengineering10020229 · Cited by 24
Learning and optimization under epistemic uncertainty with Bayesian hybrid models
Eugene, E. A., Jones, K. D., Gao, X., Wang, J., & Dowling, A. W. (2023) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2023.108430 · Cited by 24
Predictive models for upstream mammalian cell culture development - A review
Yatipanthalawa, B. S., & Gras, S. L. (2023) · Digital Chemical Engineering · doi:10.1016/j.dche.2023.100137 · Cited by 24
Brunner, V., Siegl, M., Geier, D., & Becker, T. M. (2020) · Biotechnology and Bioengineering · doi:10.1002/bit.27454 · Cited by 24
Pham, T., Manapragada, C., Sun, Y., Bassett, R., & Aickelin, U. (2022) · Digital Chemical Engineering · doi:10.1016/j.dche.2022.100080 · Cited by 22
Regression Metamodel-Based Digital Twin for an Industrial Dynamic Crossflow Filtration Process
Heusel, M., Grim, G., Rauhut, J., & Franzreb, M. (2024) · Bioengineering · doi:10.3390/bioengineering11030212 · Cited by 21
Hybrid Modeling for Bioprocesses: Architectures, Applications, and Perspectives
Herrera‐Ruiz, J. F., Fontalvo, J., & Prado‐Rubio, O. A. (2025) · Engineering Reports · doi:10.1002/eng2.70502 · Cited by 20
Silva, G. V., Thomitzek, M., Lippke, M., Heckmann, T., Karaki, H., Lischka, C., Möhlen, F., Mayer, D., Hagemeister, J., Daub, R., et al. (2022) · Energy Technology · doi:10.1002/ente.202200801 · Cited by 20
Bae, J., Lee, H. J., Jeong, D. H., & Lee, J. M. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c02720 · Cited by 20
Multi-fidelity Gaussian Process for Biomanufacturing Process Modeling with Small DataPreprint
Sun, Y., Nathan-Roberts, W., Pham, T., Otte, E. A., & Aickelin, U. (2022) · arXiv (Cornell University) · doi:10.48550/arxiv.2211.14493 · Cited by 20
Noh, W., Park, S., Kim, S., & Lee, I. (2024) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.07.018 · Cited by 18
AI and ML for Development of Cell and Gene Therapy for Personalized Treatment
Mhatre, S., Shukla, S., Chavda, V. P., Gandikota, L., & Patravale, V. B. (2023) · Wiley eBooks · doi:10.1002/9781119865728.ch16 · Cited by 18
Data-Driven Production Forecasting of Unconventional Wells with Apache Spark
Mohammadmoradi, P., Moradi, H. M., & Kantzas, A. (2018) · SPE Western Regional Meeting · doi:10.2118/190098-ms · Cited by 18
Zalai, D., Kopp, J., Kozma, B., Küchler, M., Herwig, C., & Kager, J. (2020) · Drug Discovery Today Technologies · doi:10.1016/j.ddtec.2021.04.001 · Cited by 17
Self-citationNonlinear Reactor Design Optimization With Embedded Microkinetic Model Information
Ghosh, K., Vernuccio, S., & Dowling, A. W. (2022) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2022.898685 · Cited by 17
Identifiability and physical interpretability of hybrid, gray-box models - a case study
Hotvedt, M., Grimstad, B., & Imsland, L. (2021) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2021.08.273 · Cited by 17
Digitalization concepts in academic bioprocess development
Habich, T., & Beutel, S. (2024) · Engineering in Life Sciences · doi:10.1002/elsc.202300238 · Cited by 16
Li, Y., Li, N., Ren, J., & Shen, W. (2024) · Engineering · doi:10.1016/j.eng.2024.07.009 · Cited by 16
Herrera‐Ruiz, J. F., Fontalvo, J., & Prado‐Rubio, O. A. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.103548 · Cited by 16
Wheels turning: CHO cell modeling moves into a digital biomanufacturing era
Ranpura, S. A., Maralingannavar, V., Gheorghe, A.-G., Ma, E., Morrissey, J., Betenbaugh, M. J., & Demirhan, D. (2025) · Computational and Structural Biotechnology Journal · doi:10.1016/j.csbj.2025.06.035 · Cited by 16
Digitalization Platform for Mechanistic Modeling of Battery Cell Production
Thomitzek, M., Schmidt, O., Silva, G. V., Karaki, H., Lippke, M., Krewer, U., Schröder, D., Kwade, A., & Herrmann, C. A. (2022) · Sustainability · doi:10.3390/su14031530 · Cited by 16
Passive learning to address nonstationarity in virtual flow metering applications
Hotvedt, M., Grimstad, B., & Imsland, L. (2022) · Expert Systems with Applications · doi:10.1016/j.eswa.2022.118382 · Cited by 16
Sharma, Y., Laison, E. K. E., Philippsen, T., Ma, J., Kong, J. D., Ghaemi, M. S., Liu, J., Hu, F., & Nasri, B. (2024) · The Lancet Regional Health - Americas · doi:10.1016/j.lana.2024.100706 · Cited by 15
Hermann, L., & Kremling, A. (2025) · Bioengineering · doi:10.3390/bioengineering12060654 · Cited by 15
Model-based optimization approaches for pressure-driven membrane systems
Rizki, Z., & Ottens, M. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.123682 · Cited by 15
Elsayed, A. M., Li, Z., Khan, K. A., Cormier, R. B., & de Lannoy, C. (2024) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2024.105932 · Cited by 14
Mousa, J., Negny, S., Ouaret, R., Pretoro, A. D., & Montastruc, L. (2025) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2025.109156 · Cited by 14
Bayesian neural networks for virtual flow metering: An empirical study
Grimstad, B., Hotvedt, M., Sandnes, A. T., Kolbjørnsen, O., & Imsland, L. (2021) · Applied Soft Computing · doi:10.1016/j.asoc.2021.107776 · Cited by 14
Reynaert, E., Gretener, F., Julian, T. R., & Morgenroth, E. (2022) · Water Research X · doi:10.1016/j.wroa.2022.100164 · Cited by 14
Yang, C., Du, W. J., He, R., Hu, Y.-R., Liu, H., Huang, T., & Li, W. (2023) · ACS ES&T Water · doi:10.1021/acsestwater.3c00064 · Cited by 14
Flevaris, K., & Chatzidoukas, C. (2021) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2021.100713 · Cited by 14
Xie, S., Zhong, H., Li, Y., Xu, S., Liu, W., Bian, S., & Zhang, S. (2025) · IEEE Transactions on Neural Systems and Rehabilitation Engineering · doi:10.1109/tnsre.2025.3568791 · Cited by 13
Zahoor, O., Khan, S. J., Usama, M., Tanudjaja, H. J., Ghaffour, N., & Nawaz, M. S. (2025) · Desalination and Water Treatment · doi:10.1016/j.dwt.2025.101238 · Cited by 13
Digitale Zwillinge in der Bioprozesstechnik – Chancen und Möglichkeiten
Richter, J., Lange, F., Scheper, T. H., Solle, D., & Beutel, S. (2022) · Chemie Ingenieur Technik · doi:10.1002/cite.202200166 · Cited by 13
Self-citationComparison of time series and mechanistic models of vector-borne diseases
Vyhmeister, E., Provan, G. M., Doyle, B., Bourke, B. P., Castañé, G. G., & Reyes-Bozo, L. (2022) · Spatial and Spatio-temporal Epidemiology · doi:10.1016/j.sste.2022.100478 · Cited by 12
Assessment of data‐driven modeling approaches for chromatographic separation processes
Michalopoulou, F., & Papathanasiou, M. M. (2024) · AIChE Journal · doi:10.1002/aic.18600 · Cited by 12
Zheng, H., Xie, W., Wang, K., & Li, Z. (2022) · arXiv (Cornell University) · doi:10.48550/arxiv.2201.03116 · Cited by 12
Explainable and generalizable AI-driven multiscale informatics for dynamic system modelling
Luo, C., Li, A.-J., Xiao, J., Li, M., Zhou, L., Li, C., & Li, Y. (2024) · Scientific Reports · doi:10.1038/s41598-024-67259-4 · Cited by 11
On the impact of mechanistic model quality and data availability in hybrid model development
Geremia, M., Marella, T., Ardalani, E., Beyramysoltan, S., Chattoraj, S., Facco, P., Barolo, M., & Bezzo, F. (2025) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2025.109536 · Cited by 10
Puranik, A., Saldanha, M., Chirmule, N. B., Dandekar, P. P., & Jain, R. D. (2022) · Biotechnology Progress · doi:10.1002/btpr.3283 · Cited by 10
Berg, C., Ihling, N., Finger, M., Paquet‐Durand, O., Hitzmann, B., & Büchs, J. (2022) · Bioengineering · doi:10.3390/bioengineering9090438 · Cited by 10
Self-citationLi, Y., Yang, Z., Deng, X., Li, N., Li, S., Lei, Z., Eslamimanesh, A., Jin, S., & Shen, W. (2023) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2023.09.040 · Cited by 9
Hoyos, J. D., Noriega, M. A., & Riascos, C. A. M. (2023) · Digital Chemical Engineering · doi:10.1016/j.dche.2023.100132 · Cited by 9
Data-driven Iterative Learning Model Predictive Control for Pneumatic Muscle Actuators
Xie, S., Liu, W., & Bian, S. (2024) · International Journal of Control Automation and Systems · doi:10.1007/s12555-023-0511-7 · Cited by 8
Weir, L., Mathias, N., Corbett, B., & Mhaskar, P. (2024) · AIChE Journal · doi:10.1002/aic.18634 · Cited by 8
A Comprehensive Guideline for Hybrid Modeling of Engineered Microbial Processes
Cheng, Z., Xia, W., Zhu, J.-J., Cao, J., Ren, Z. J., & Yuan, H. (2025) · Water Research · doi:10.1016/j.watres.2025.124559 · Cited by 8
Rathinavelu, S., Pavan, S. S., & Sivaprakasam, S. (2023) · Biotechnology and Bioprocess Engineering · doi:10.1007/s12257-022-0247-x · Cited by 8
Ananda, R., Daud, K. M., & Zainudin, S. (2023) · doi:10.1109/iceei59426.2023.10346837 · Cited by 7
Arnese-Feffin, E., Facco, P., Turati, D., Bezzo, F., & Barolo, M. (2023) · Chemical Engineering Science · doi:10.1016/j.ces.2023.119413 · Cited by 6
Metadata
- Authors
- Solle, D., Hitzmann, B., Herwig, C., Pereira Remelhe, M., Ulonska, S., Wuerth, L., Prata, A., & Steckenreiter, T.
- Affiliations
- Leibniz University Hannover (DE)
- University of Hohenheim (DE)
- TU Wien (AT)
- Bayer AG Kaiser-Wilhelm-Allee 51373 Leverkusen Germany
- Bayer (Germany) (DE)
- Corresponding author
- Hitzmann, Bernd
- Venue
- Chemie Ingenieur Technik
- Publisher
- Wiley
- Published
- 2017-04-06
- Volume
- 89
- Issue
- 5
- Pages
- 542-561
- ISSN
- 0009-286X (ISSN-L)
- 1522-2640
- OpenAlex
- W2605055938
- Cited by
- 134
- References
- 55
- Citations by year
- 2026: 8 · 2025: 20 · 2024: 25 · 2023: 22 · 2022: 24 · 2021: 17 · 2020: 9 · 2019: 3 · 2018: 3 · 2017: 2
- FWCI
- 2.92
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemie Ingenieur Technik (publishedVersion)
- Funders
- Österreichische Forschungsförderungsgesellschaft
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Control and Systems Engineering › Control Systems and Identification
- Physical Sciences › Engineering › Control and Systems Engineering › Advanced Control Systems Optimization
- Keywords
- process analytical technology, mechanistic model, data-driven modeling, process monitoring, real-time process monitoring, model-based process control, hybrid modeling, product quality attributes
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.