The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Lignin Model Compounds as Bio‐Based Reactive Diluents for Liquid Molding Resins
Abstract
Lignin is a copious paper and pulping waste product that has the potential to yield valuable, low molecular weight, single aromatic chemicals when strategically depolymerized. The single aromatic lignin model compounds, vanillin, guaiacol, and eugenol, were methacrylated by esterification with methacrylic anhydride and a catalytic amount of 4‐dimethylaminopyridine. Methacrylated guaiacol (MG) and methacrylated eugenol (ME) exhibited low viscosities at room temperature (MG: 17 cP and ME: 28 cP). When used as reactive diluents in vinyl ester resins, they produced resin viscosities higher than that of vinyl ester–styrene blends. The relative volatilities of MG (1.05 wt % loss in 18 h) and ME (0.96 wt % loss in 18 h) measured by means of thermogravimetric analysis (TGA) were considerably lower than that of styrene (93.7 wt % loss in 3 h) indicating the potential of these chemicals to be environmentally friendly reactive diluents. Bulk polymerization of MG and ME generated homopolymers with glass transition temperatures (Tg s) of 92 and 103 °C, respectively. Blends of a standard vinyl ester resin with MG and ME (50 wt % reactive diluent) produced thermosets with Tg s of 127 and 153 °C, respectively, which are comparable to vinyl ester–styrene resins, thus demonstrating the ability of MG and ME to completely replace styrene as reactive diluents in liquid molding resins without sacrificing cured‐resin thermal performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of current and future softwood kraft lignin process chemistry
Chakar, F. S., & Ragauskas, A. J. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2004.04.016 · Cited by 1,203
Cited by
Alternative Monomers Based on Lignocellulose and Their Use for Polymer Production
Delidovich, I., Hausoul, P. J. C., Deng, L., Pfützenreuter, R., Rose, M., & Palkovits, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00354 · Cited by 773
Naturally occurring phenolic sources: monomers and polymers
Lochab, B., Shukla, S., & Varma, I. K. (2014) · RSC Adv. · doi:10.1039/c4ra00181h · Cited by 293
The quest for high glass transition temperature bioplastics
Nguyen, H. T. H., Qi, P., Rostagno, M., Feteha, A., & Miller, S. A. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00377g · Cited by 260
The potential use of lignin as a platform product in biorefineries: A review
Poveda-Giraldo, J. A., Solarte-Toro, J. C., & Cardona Alzate, C. A. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110688 · Cited by 253
Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers
Hayes, G., Laurel, M., MacKinnon, D., Zhao, T., Houck, H. A., & Becer, C. R. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00354 · Cited by 253
Metadata
- Authors
- Stanzione, J. F., Sadler, J. M., La Scala, J. J., & Wool, R. P.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2012-04-19
- Volume
- 5
- Issue
- 7
- Pages
- 1291-1297
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2093365935
- Cited by
- 175
- References
- 1
- FWCI
- 3.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.