CoChat

Direct Gas–Solid Carbonation Kinetics of Steel Slag and the Contribution to In situ Sequestration of Flue Gas CO 2 in Steel‐Making Plants

The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.

Abstract

Direct gas–solid carbonation of steel slag under various operational conditions was investigated to determine the sequestration of the flue gas CO 2 . X‐ray diffraction analysis of steel slag revealed the existence of portlandite, which provided a maximum theoretical CO 2 sequestration potential of 159.4 kg t slag −1 as calculated by the reference intensity ratio method. The carbonation reaction occurred through a fast kinetically controlled stage with an activation energy of 21.29 kJ mol −1 , followed by 10 3 orders of magnitude slower diffusion‐controlled stage with an activation energy of 49.54 kJ mol −1 , which could be represented by a first‐order reaction kinetic equation and the Ginstling equation, respectively. Temperature, CO 2 concentration, and the presence of SO 2 impacted on the carbonation conversion of steel slag through their direct and definite influence on the rate constants. Temperature was the most important factor influencing the direct gas–solid carbonation of steel slag in terms of both the carbonation conversion and reaction rate. CO 2 concentration had a definite influence on the carbonation rate during the kinetically controlled stage, and the presence of SO 2 at typical flue gas concentrations enhanced the direct gas–solid carbonation of steel slag. Carbonation conversions between 49.5 % and 55.5 % were achieved in a typical flue gas at 600 °C, with the maximum CO 2 sequestration amount generating 88.5 kg t slag −1 . Direct gas–solid carbonation of steel slag showed a rapid CO 2 sequestration rate, high CO 2 sequestration amounts, low raw‐material costs, and a large potential for waste heat utilization, which is promising for in situ carbon capture and sequestration in the steel industry.

Overview

Integrity signals

Registry

Crossref · 10.1002/cssc.201300436

Cites

38 of 38 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 38 references

Research works printed but not linked: 3

  1. 2011, China Steel Yearbook
  2. International Energy Agency (IEA) Tracking Industrial Energy Efficiency and CO2Emissions to be found underhttp://www.iea.org/publications/freepublications/publication/tracking_emissions.pdf 2007 pp. 95–136.
  3. Bamford C. H., 1975, Comprehensive Chemical Kinetics, Vol. 22, 41

Cited by

Items 101–128 of 128

Metadata

Authors
Tian, S., Jiang, J., Chen, X., Yan, F., & Li, K.
Affiliations
Tsinghua University (CN)
Corresponding author
Jiang, Jianguo
Venue
ChemSusChem
Publisher
Wiley
Published
2013-08-02
Volume
6
Issue
12
Pages
2348-2355
ISSN
  • 1864-5631 (ISSN-L)
  • 1864-564X
OpenAlex
W2038271964
Cited by
120
References
38
Citations by year
2026: 21 · 2025: 16 · 2024: 32 · 2023: 9 · 2022: 10 · 2021: 12 · 2020: 3 · 2019: 2 · 2018: 5 · 2017: 3 · 2016: 1 · 2015: 4 · 2014: 2
FWCI
1.93
Type
journal article
Language
en
Open access
closed
Locations
  • ChemSusChem (publishedVersion)
  • PubMed (publishedVersion)
Topics
  • Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
  • Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
Keywords
steel slag, CO2 sequestration, flue gas CO2, carbon capture and storage, portlandite, carbonation kinetics, activation energy, SO2 effect, steel industry, waste heat recovery
MeSH terms
Air Pollutants, Carbon Dioxide, Industrial Waste, Kinetics, Steel, Waste Management, Carbon Sequestration

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.