The DOI matches its Crossref record.
Direct Liquid Coating of Chalcopyrite Light‐Absorbing Layers for Photovoltaic Devices
Abstract
Liquid deposition approaches for chalcopyrite films used in thin‐film photovoltaic devices are reviewed. Most of the targeted materials are based on Cu‐In or Cu‐In‐Ga sulfides and selenides (i.e., CIS or CIGS, respectively), although recently related alternative materials based on abundant and non‐toxic elements such as the kesterite Cu 2 ZnSnS 4 have been actively investigated. By direct liquid coating we refer collectively to a variety of techniques characterized by distributing a liquid or a paste to the surface of a substrate, followed by necessary thermal/chemical treatments to achieve the desired phase. The deposition media used are solutions or particle (usually submicrometer size) suspensions of metal oxide, organic and inorganic compounds, including metal chalcogenide species. The deposition techniques used are mainly printing and spin‐coating, although any standard process such as spraying, dip‐coating or slit casting can be applied. In contrast to other widely investigated liquid‐coating methods such as chemical bath and electrodeposition, in which relatively slower solid film growth occurs during the actual deposition step, the techniques discussed in this Microreview are mainly sequential, featuring rapid formation of a precursor film with well‐defined metal stoichiometry. The precursor film is then transformed by a thermal treatment, generally in a chalcogen‐containing atmosphere, to the final crystalline layer. This approach permits the use of low‐cost and high‐throughput equipment and the deployment of large‐scale production facilities with lower capital investment. Although many of the methods discussed are under laboratory development, there are already industrial start‐ups employing these promising methods for future large‐scale photovoltaic production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Docampo, P., Ball, J. M., Darwich, M., Eperon, G. E., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3761 · Cited by 1,703
Faber, M. S., & Jin, S. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01760a · Cited by 1,317
High‐Efficiency Solar Cell with Earth‐Abundant Liquid‐Processed Absorber
Todorov, T. K., Reuter, K. B., & Mitzi, D. B. (2010) · Advanced Materials · doi:10.1002/adma.200904155 · Cited by 1,132
Self-citationMaterials interface engineering for solution-processed photovoltaics
Graetzel, M., Janssen, R. A. J., Mitzi, D. B., & Sargent, E. H. (2012) · Nature · doi:10.1038/nature11476 · Cited by 1,112
Self-citation
Metadata
- Authors
- Todorov, T., & Mitzi, D. B.
- Venue
- European Journal of Inorganic Chemistry
- Publisher
- Wiley
- Published
- 2009-12-21
- Volume
- 2010
- Issue
- 1
- Pages
- 17-28
- ISSN
- 1099-0682 (ISSN-L)
- 1434-1948
- OpenAlex
- W2044982381
- Cited by
- 232
- References
- 0
- FWCI
- 12.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Direct Liquid Coating of Chalcopyrite Light‐Absorbing Layers for Photovoltaic Devices. https://app.cochat.ai/papers/10.1002/ejic.200900837
- The paper
- Todorov, T., & Mitzi, D. B. (2010). Direct Liquid Coating of Chalcopyrite Light‐Absorbing Layers for Photovoltaic Devices. European Journal of Inorganic Chemistry. https://doi.org/10.1002/ejic.200900837
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.