The DOI matches its Crossref record.
Oligomerization of glycerol – a critical review
Abstract
The oligomerization of glycerol to preferentially di‐ and triglycerol is reviewed, with primary focus on the use of heterogeneous acidic and basic catalysts. Low molecular‐weight oligomers have found a wide field of applications in cosmetics, food industry and polymer production. The growing market intensified research work on the selective catalytic oligomerization of glycerol. Performing the reaction of glycerol in the presence of microporous and mesoporous solid catalysts aims at exerting shape‐selective effects on the reaction, suppressing the abundant formation of cyclic isomers and cutting further polymerization of the target products. Enhanced selectivity to diglycerol is observed over some type of catalysts, but the solids suffer from leaching of active alkaline cations from the solid, severe deterioration of crystallinity of zeolites and even dissolution of the solids in the hot glycerol during batch reaction at temperatures in the range of 240–260°C. In those cases it is difficult to separate homogeneous and heterogenous reaction routes, and the shape‐selective effects are levelled off. The oligomerization is a consecutive reaction, and complete conversion of glycerol favours formation of high molecular‐weight glycerol oligo‐ and polymers. To achieve maximum yield of diglycerol, the reaction has to be interrupted at glycerol conversions of ca.50%. Alternative reaction engineering is required to overcome the inherent disadvantages of a batch reaction. Examples will be given for a selective glycerol oligomerization under reduced pressure in a so‐called fall‐film reactor using super‐acidic polymers as catalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Isikgor, F. H., & Becer, C. R. (2015) · Polymer Chemistry · doi:10.1039/c5py00263j · Cited by 2,775
From monomers to polymers from renewable resources: Recent advances
Gandini, A., & Lacerda, T. M. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.11.002 · Cited by 620
Ayoub, M., & Abdullah, A. Z. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.054 · Cited by 560
Enzymatic Biodiesel: Challenges and Opportunities
Christopher, L. P., Kumar, H., & Zambare, V. P. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.01.017 · Cited by 518
Li, H., Riisager, A., Saravanamurugan, S., Pandey, A., Sangwan, R. S., Yang, S., & Luque, R. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b02577 · Cited by 383
Metadata
- Authors
- Martin, A., & Richter, M.
- Venue
- European Journal of Lipid Science and Technology
- Publisher
- Wiley
- Published
- 2010-11-17
- Volume
- 113
- Issue
- 1
- Pages
- 100-117
- ISSN
- 1438-7697 (ISSN-L)
- 1438-9312
- OpenAlex
- W2069241645
- Cited by
- 182
- References
- 0
- FWCI
- 5.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Oligomerization of glycerol – a critical review. https://app.cochat.ai/papers/10.1002/ejlt.201000386
- The paper
- Martin, A., & Richter, M. (2011). Oligomerization of glycerol – a critical review. European Journal of Lipid Science and Technology. https://doi.org/10.1002/ejlt.201000386
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.