Soft sensor based on 2D‐fluorescence and process data enabling real‐time estimation of biomass in Escherichia coli cultivations
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
In bioprocesses, specific process responses such as the biomass cannot typically be measured directly on‐line, since analytical sampling is associated with unavoidable time delays. Accessing those responses in real‐time is essential for Quality by Design and process analytical technology concepts. Soft sensors overcome these limitations by indirectly measuring the variables of interest using a previously derived model and actual process data in real time. In this study, a biomass soft sensor based on 2D‐fluorescence data and process data, was developed for a comprehensive study with a 20‐L experimental design, for Escherichia coli fed‐batch cultivations. A multivariate adaptive regression splines algorithm was applied to 2D‐fluorescence spectra and process data, to estimate the biomass concentration at any time during the process. Prediction errors of 4.9% (0.99 g/L) for validation and 3.8% (0.69 g/L) for new data (external validation), were obtained. Using principal component and parallel factor analyses on the 2D‐fluorescence data, two potential chemical compounds were identified and directly linked to cell metabolism. The same wavelength pairs were also important predictors for the regression‐model performance. Overall, the proposed soft sensor is a valuable tool for monitoring the process performance on‐line, enabling Quality by Design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Data-driven Soft Sensors in the process industry
Kadlec, P., Gabrys, B., & Strandt, S. (2009) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2008.12.012 · Cited by 1,845 · cited 1×
“Some frequently applied machine learning methods make use of partial least squares regression, but non-linear methods such as random forest, artificial neural networks and support vector machines are also in use [19].”
MethodHybrid semi-parametric modeling in process systems engineering: Past, present and future
von Stosch, M., Oliveira, R., Peres, J., & Feyo de Azevedo, S. (2014) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2013.08.008 · Cited by 490
Fluorescence Spectroscopy and Chemometric Modeling for Bioprocess Monitoring
Faassen, S., & Hitzmann, B. (2015) · Sensors · doi:10.3390/s150510271 · Cited by 120 · cited 1×
“Fluorescence spectroscopy is based on determining the specific excitation and emission wavelengths of a compound in order to identify it qualitatively and quantitatively, in the range of the measured 2D-fluorescence spectrum [11,12].”
BackgroundMini‐review: soft sensors as means for PAT in the manufacture of bio‐therapeutics
Mandenius, C., & Gustavsson, R. (2015) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4477 · Cited by 84 · cited 1×
“With the help of machine learning methods, these on-line signals can be translated into the corresponding off-line variables [14].”
Method
Cited by
Bioprocess Control: Current Progress and Future Perspectives
Rathore, A. S., Mishra, S., Nikita, S., & Priyanka, P. (2021) · Life · doi:10.3390/life11060557 · Cited by 141
Challenges in the Development of Soft Sensors for Bioprocesses: A Critical Review
Brunner, V., Siegl, M., Geier, D., & Becker, T. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.722202 · Cited by 100
“…mid-infrared (Capito et al., 2015; Sauer et al., 2019; Walch et al., 2019; Wasalathanthri et al., 2020a; Cabaneros Lopez et al., 2021), 2D fluorescence (Melcher et al., 2015; Bayer et al., 2020), Raman (Matthews et al., 2016; Voss et al., 2017), and nuclear magnetic resonance (Kern et al., 2019).”
BackgroundNoll, P., & Henkel, M. (2020) · Computational and Structural Biotechnology Journal · doi:10.1016/j.csbj.2020.10.018 · Cited by 60
Pais, D. A. M., Galrão, P. R. S., Kryzhanska, A., Barbau, J., Isidro, I. A., & Alves, P. M. (2020) · Processes · doi:10.3390/pr8040487 · Cited by 25
Metadata
- Authors
- Bayer, B., von Stosch, M., Melcher, M., Duerkop, M., & Striedner, G.
- Venue
- Engineering in Life Sciences
- Publisher
- Wiley
- Published
- 2019-11-11
- Volume
- 20
- Issue
- 1-2
- Pages
- 26-35
- ISSN
- 1618-0240 (ISSN-L)
- 1618-2863
- OpenAlex
- W2983212260
- Cited by
- 27
- References
- 4
- FWCI
- 1.62
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.