The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Analysis of Lithium‐Ion Battery Models Based on Electrochemical Impedance Spectroscopy
Open accessAbstract
This work is an overview of various equivalent circuits (ECs) containing various degrees of detail. The ECs are evaluated in terms of model accuracy and parameterization time for the systematic assignment of an equivalent circuit to application fields. For this purpose, impedance spectra were measured using electrochemical impedance spectroscopy at different states of charge, health and temperatures. Then the parameters of the EC were extracted using the least‐squares method and the Levenberg–Marquardt algorithm. After comparing the simulated to the measured impedance spectrum, a review and assignment of equivalent circuits for potential applications is given. Simple equivalent circuits with a series resistor and a maximum of two resistance–capacitance (RC) elements are ideal for simulations with lower dynamics. Equivalent circuits with up to five RC elements or even a constant‐phase element (CPE) are promising for simulating highly dynamic processes. By using RCPE elements the impedance spectrum can be modeled with the highest accuracy, which is why this type of model should be used for diagnostic purposes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179
Modeling and Simulation of Lithium-Ion Batteries from a Systems Engineering Perspective
Northrop, P. W. C., De, S., Braatz, R. D., Ramadesigan, V., Northrop, P. W. C., Santhanagopalan, S., & Subramaniana, V. R. (2011) · Cited by 748
Andre, D., Meiler, M., Steiner, K., Wimmer, C., Soczka-Guth, T., & Sauer, D. U. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.102 · Cited by 703
Andre, D., Meiler, M., Steiner, K., Walz, H., Soczka-Guth, T., & Sauer, D. U. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.071 · Cited by 547
Seaman, A., Dao, T.-S., & McPhee, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.057 · Cited by 453
Galeotti, M., Cinà, L., Giammanco, C., Cordiner, S., & Di Carlo, A. (2015) · Energy · doi:10.1016/j.energy.2015.05.148 · Cited by 412
Huang, J., Li, Z., Liaw, B. Y., & Zhang, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.073 · Cited by 399
Mathematical modeling of lithium-ion and nickel battery systems
Gomadam, P. M., Weidner, J. W., Dougal, R. A., & White, R. E. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00190-8 · Cited by 344
Studies on capacity fade of lithium-ion batteries
Zhang, D., Haran, B. S., Durairajan, A., White, R. E., Podrazhansky, Y., & Popov, B. N. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00469-9 · Cited by 299
Chen, Z., Mi, C. C., Fu, Y., Xu, J., & Gong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.158 · Cited by 279
Effects of Nanoparticle Geometry and Size Distribution on Diffusion Impedance of Battery Electrodes
Song, J., & Bazant, M. Z. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.023301jes · Cited by 263
Schmidt, J. P., Berg, P., Schönleber, M., Weber, A., & Ivers-Tiffée, E. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.100 · Cited by 206
AC impedance and state-of-charge analysis of a sealed lithium-ion rechargeable battery
Rodrigues, S., Munichandraiah, N., & Shukla, A. K. (1999) · Journal of Solid State Electrochemistry · doi:10.1007/s100080050173 · Cited by 201
An electrochemistry-based impedance model for lithium-ion batteries
Li, S. E., Wang, B., Peng, H., & Hu, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.045 · Cited by 197
Effects of vibrations and shocks on lithium-ion cells
Brand, M. J., Schuster, S. F., Bach, T., Fleder, E., Stelz, M., Gläser, S., Müller, J., Sextl, G., & Jossen, A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.04.107 · Cited by 176
A three-dimensional multi-physics model for a Li-ion battery
Guo, M., Kim, G., & White, R. E. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.170 · Cited by 134
Fleischer, C., Waag, W., Heyn, H.-M., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.046 · Cited by 133
Empirical Modeling of Lithium-ion Batteries Based on Electrochemical Impedance Spectroscopy Tests
Samadani, E., Farhad, S., Scott, W., Mastali, M., Gimenez, L. E., Fowler, M. W., & Fraser, R. A. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.02.021 · Cited by 104
Gao, P., Zhang, C., & Wen, G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.032 · Cited by 89
Three-Dimensional Multi-Physics Model for Li-Ion Battery
Guo, M. (2013) · ECS Meeting Abstracts · doi:10.1149/ma2013-02/14/1212 · Cited by 79
Zhu, J.-G., Sun, Z., Wei, X.-Z., & Dai, H.-F. (2016) · Journal of Applied Electrochemistry · doi:10.1007/s10800-015-0887-z · Cited by 76
Farmann, A., Waag, W., & Sauer, D. U. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.08.087 · Cited by 60
Waag, W., Käbitz, S., & Sauer, D. U. (2013) · Measurement · doi:10.1016/j.measurement.2013.07.025 · Cited by 48
Li-ion batteries and Li-ion ultracapacitors: Characteristics, modeling and grid applications
Hamidi, S. A., Manla, E., & Nasiri, A. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310361 · Cited by 27
Online state and parameter estimation of the Li-ion battery in a Bayesian framework
Samadi, M. F., Alavi, S. M. M., & Saif, M. (2013) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2013.6580563 · Cited by 27
Kim, T., Qiao, W., & Qu, L. (2013) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2013.6520266 · Cited by 26
Coupled mechanical and electrochemical characterization method for battery materials
Schmitt, J., Treuer, F., Dietrich, F., Dröder, K., Heins, T. P., Schröder, U., Westerhoff, U., Kurrat, M., & Raatz, A. (2014) · IEEE Conference on Energy Conversion · doi:10.1109/cencon.2014.6967536 · Cited by 4
Self-citation
Cited by
Electrochemical Impedance Spectroscopy─A Tutorial
Lazanas, A. C., & Prodromidis, M. I. (2023) · ACS Measurement Science Au · doi:10.1021/acsmeasuresciau.2c00070 · Cited by 3,123
Modeling and Applications of Electrochemical Impedance Spectroscopy (EIS) for Lithium-ion Batteries
Choi, W., Shin, H.-C., Kim, J. M., Choi, J.-Y., & Yoon, W.-S. (2020) · Journal of Electrochemical Science and Technology · doi:10.33961/jecst.2019.00528 · Cited by 1,210
Shrivastava, P., Soon, T. K., Idris, M. Y. I. B., & Mekhilef, S. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.06.040 · Cited by 704
Impedance Analysis of Electrochemical Systems
Vivier, V., & Orazem, M. E. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00876 · Cited by 615
Vadhva, P., Hu, J., Johnson, M. J., Stocker, R., Braglia, M., Brett, D. J. L., & Rettie, A. J. E. (2021) · ChemElectroChem · doi:10.1002/celc.202100108 · Cited by 531
Metadata
- Authors
- Westerhoff, U., Kurbach, K., Lienesch, F., & Kurrat, M.
- Venue
- Energy Technology
- Publisher
- Wiley
- Published
- 2016-08-18
- Volume
- 4
- Issue
- 12
- Pages
- 1620-1630
- ISSN
- 2194-4288 (ISSN-L)
- 2194-4296
- OpenAlex
- W2508914177
- Cited by
- 316
- References
- 27
- FWCI
- 9.97
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.