Chemistry of aqueous mineral carbonation for carbon sequestration and explanation of experimental results
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In aqueous mineral carbonation for carbon sequestration, high‐pressure CO 2 is injected into water or sodium bicarbonate solution mixed with olivine or serpentine to produce magnesium carbonate. Thus, CO 2 gas is fixed in a solid carbonate for sequestration. Such reactions are generally slow, and a significant amount of research was conducted to increase the reaction rate. This article is an initial effort using basic thermodynamic analysis to understand this complicated heterogeneous chemical process, and to explain some experimental results. The approach started with decomposing the process into two basic steps: magnesium ion dissolution from the olivine or serpentine, and magnesite precipitation. Thermodynamic calculation then is used to assess two important parameters for each of these two steps: the pH and carbonic ion concentration. The calculations explain the roles of increased CO 2 pressure, elevated temperature, and adding sodium bicarbonate for enhancing the carbonation reaction, and these results agreed well with the experimental data. The analysis also indicates that for reaction routes in which leaching magnesium silicate and forming magnesium carbonate occur in the same reactor, lowering the pH helps dissolve magnesium ions from silicate, but it lowers carbonic ion concentration and limits precipitation of magnesite; careful balance of these two steps is critical. Further improvement may be built upon this model. © 2006 American Institute of Chemical Engineers Environ Prog, 2006
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Van Herk, J., Pietersen, H. S., & Schuiling, R. D. (1989) · Chemical Geology · doi:10.1016/0009-2541(89)90102-2 · Cited by 54
Cited by
Carbon capture and storage using alkaline industrial wastes
Bobicki, E. R., Liu, Q., Xu, Z., & Zeng, H. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.11.002 · Cited by 666
Carbon dioxide sequestration in cement kiln dust through mineral carbonation
Huntzinger, D. N., Gierke, J. S., Kawatra, S. K., Eisele, T. C., & Sutter, L. L. (2009) · Environmental Science & Technology · doi:10.1021/es802910z · Cited by 442
Daval, D., Sissmann, O., Menguy, N., Saldi, G. D., Guyot, F., Martinez, I., Corvisier, J., Garcia, B., Machouk, I., Knauss, K. G., et al. (2011) · Chemical Geology · doi:10.1016/j.chemgeo.2011.02.021 · Cited by 338
“, 2010 for carbonate formation and stability), the vast majority of them addressed the overall process by running batch experiments using Mg-rich olivine close to forsterite (Mg2SiO4) composition as starting materials (e.g. O'Connor et al., 2002; Giammar et al., 2005; Bearat et al., 2006; Chen et al., 2006; Gerdemanne…”
BackgroundAccelerated carbonation of brucite in mine tailings for carbon sequestration
Harrison, A. L., Power, I. M., & Dipple, G. M. (2013) · Environmental Science & Technology · doi:10.1021/es3012854 · Cited by 328
A review on carbon dioxide mineral carbonation through pH-swing process
Azdarpour, A., Asadullah, M., Mohammadian, E., Hamidi, H., Junin, R., & Karaei, M. A. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.05.064 · Cited by 275
Metadata
- Authors
- Chen, Z., O'Connor, W. K., & Gerdemann, S. J.
- Venue
- Environmental Progress
- Publisher
- Wiley
- Published
- 2006-03-21
- Volume
- 25
- Issue
- 2
- Pages
- 161-166
- ISSN
- 0278-4491 (ISSN-L)
- 1547-5921
- OpenAlex
- W2013760793
- Cited by
- 143
- References
- 1
- FWCI
- 3.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.