The DOI matches its Crossref record.
Life cycle assessment of polylactic acid and polyethylene terephthalate bottles for drinking water
Abstract
The biodegradable plastics were introduced in the 1980s to detect possible renewable feedstock to produce nonpetroleum‐based plastics as well as to reduce the environmental problems due to the increase of landfill volume. Furthermore, the biodegradable plastics have been used to reduce the environmental impact (in terms of energy requirement from nonrenewable resources and CO 2 gas emissions) derived from production, utilization, and disposal of petroleum‐based plastics, like polyethylene terephthalate (PET). To this end, in the last years, different typologies of bioplastics were introduced (both biodegradable plastics and plastics made from renewable resources) like Mater‐Bi (made from starch), poly‐3‐hydroxybuyrate, polycaprolactone, and polylactic acid (PLA). Nowadays, the most important tool to evaluate the environmental impact of a bioplastic and/or of a petroleum‐based plastic (conventional plastic) is the life cycle assessment (LCA) that determines the overall impact of a plastic on the environment by defining and analyzing several impact indices directly related to production, utilization, and disposal of the considered plastics. In this work, the LCA (cradle to grave) of PLA bottles for drinking water was developed and compared to the LCA of PET bottles for the same use. The obtained results highlighted that the true advantage of the PLA bottles with respect to the PET bottles arises from the use of renewable resources, but this benefit is paid in environmental terms due to the higher impact on human health and ecosystem quality (due to the use of pesticides, consumption of land, and consumption of water for the production of raw materials). © 2010 American Institute of Chemical Engineers Environ Prog, 2011
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Hydrolytic degradation of polylactic acid (PLA) and its composites
Elsawy, M. A., Kim, K.-H., Park, J.-W., & Deep, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.143 · Cited by 988
Life cycle assessments of biodegradable, commercial biopolymers—A critical review
Yates, M. R., & Barlow, C. Y. (2013) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.06.010 · Cited by 441
Bishop, G., Styles, D., & Lens, P. N. L. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2021.105451 · Cited by 401
Food packaging and sustainability – Consumer perception vs. correlated scientific facts: A review
Otto, S., Strenger, M., Maier-Nöth, A., & Schmid, M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126733 · Cited by 379
A Review of Poly(Lactic Acid)‐Based Materials for Antimicrobial Packaging
Tawakkal, I. S. M. A., Cran, M. J., Miltz, J., & Bigger, S. W. (2014) · Journal of Food Science · doi:10.1111/1750-3841.12534 · Cited by 309
Benavides, P. T., Lee, U., & Zarè-Mehrjerdi, O. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124010 · Cited by 274
Biopolymer production and end of life comparisons using life cycle assessment
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.03.002 · Cited by 255
Zhang, H., Hortal, M., Dobon, A., Bermudez, J. M., & Lara‐Lledo, M. (2015) · Packaging Technology and Science · doi:10.1002/pts.2135 · Cited by 80
Biodegradable Polyesters from Renewable Resources
Tsui, A., Wright, Z. C., & Frank, C. W. (2013) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061312-103323 · Cited by 68
Metadata
- Authors
- Gironi, F., & Piemonte, V.
- Venue
- Environmental Progress & Sustainable Energy
- Publisher
- Wiley
- Published
- 2010-09-10
- Volume
- 30
- Issue
- 3
- Pages
- 459-468
- ISSN
- 1944-7442 (ISSN-L)
- 1944-7450
- OpenAlex
- W2001790849
- Cited by
- 184
- References
- 0
- FWCI
- 4.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.