The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Effect of hydrothermal carbonization reaction parameters on the properties of hydrochar and pellets
Abstract
Hydrothermal carbonization (HTC) is a promising upgrading process to convert various low energy‐density lignocellulosic biomass materials to homogeneous, energy‐dense HTC biochar, known as hydrochar. A novel two‐chamber reactor was designed and built to investigate the effects of HTC reaction parameters on the resulting hydrochar produced from woody biomass. Reaction parameters investigated included temperature (200–230°C), feedstock particle size (0.60–2.38 mm), and reaction time (1–5 min). Mass yield and higher heating value (HHV) of the hydrochar products were determined as two important measures. Reaction temperature was found to have a much stronger influence on mass yield and HHV than particle size or reaction time. Hydrochar can be formed readily into robust, dense pellets, without requiring any additional binding agent. Pellet density ranged from 1260 to 1320 kg m−3, while volumetric energy density ranged from 27.3 to 29.5 GJ m−3. Several analyses were performed on hydrochar pellets, including ultimate analysis, proximate analysis, and water immersion tests. Results are presented and discussed to illustrate the chemical composition, energy density, and water resistance of hydrochar pellets. This study confirmed that the HTC process can transform lignocellulosic biomass into a solid fuel with favorable properties, and provides insightful guidance regarding optimum reaction parameters for producing hydrochar and pellets in a continuous, industrial process. © 2014 American Institute of Chemical Engineers Environ Prog, 33: 676–680, 2014
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reaction kinetics of hydrothermal carbonization of loblolly pine
Reza, M. T., Yan, W., Uddin, M. H., Lynam, J. G., Hoekman, S. K., Coronella, C. J., & Vásquez, V. R. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.04.028 · Cited by 200
Self-citation
Cited by
Application of biochar for the removal of pollutants from aqueous solutions
Tan, X., Liu, Y., Zeng, G., Wang, X., Hu, X., Gu, Y., & Yang, Z. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2014.12.058 · Cited by 2,081
Heidari, M., Dutta, A., Acharya, B., & Mahmud, S. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2018.12.003 · Cited by 464
Widely used catalysts in biodiesel production: a review
Changmai, B., Vanlalveni, C., Ingle, A. P., Bhagat, R., & Rokhum, S. L. (2020) · RSC Advances · doi:10.1039/d0ra07931f · Cited by 390
Athar, M., & Zaidi, S. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104523 · Cited by 271
Harvesting of microalgae by centrifugation for biodiesel production: A review
Najjar, Y. S. H., & Abu-Shamleh, A. (2020) · Algal Research · doi:10.1016/j.algal.2020.102046 · Cited by 263
Metadata
- Authors
- Yan, W., Hoekman, S. K., Broch, A., & Coronella, C. J.
- Venue
- Environmental Progress & Sustainable Energy
- Publisher
- Wiley
- Published
- 2014-03-25
- Volume
- 33
- Issue
- 3
- Pages
- 676-680
- ISSN
- 1944-7442 (ISSN-L)
- 1944-7450
- OpenAlex
- W2157501145
- Cited by
- 252
- References
- 1
- FWCI
- 2.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.