Shaking table test of the effects of multi‐unit particle dampers attached to an MDOF system under earthquake excitation
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
SUMMARY: This paper presents the results of an experimental and analytical/computational study of the performance of multi‐unit particle dampers with an MDOF system. A series of shaking table tests of a three‐storey steel frame with the particle damper system were carried out to evaluate the performance of the system and to verify the analysis method. An analytical solution based on the discrete element method is also presented. A comparison between the experimental and computational results shows that reasonably accurate estimates of the response of a primary system under earthquake excitations can be obtained. These results also indicate that the excitation characterization influences the performance of the particle damper system, for example, particle dampers have good performance in reducing the seismic response of structures and particle movements of plug flow pattern can yield good vibration attenuation effects. It is shown that by using properly designed multi‐unit particle dampers, a lightly damped primary system can achieve a reasonable reduction in its response, with a small weight penalty. Copyright © 2011 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codes
Di Renzo, A., & Di Maio, F. P. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2003.09.037 · Cited by 1,127
Cited by
Research developments in vibration control of structures using passive tuned mass dampers
Elias, S., & Matsagar, V. (2017) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2017.09.015 · Cited by 556
Nonlinear dissipative devices in structural vibration control: A review
Lu, Z., Wang, Z., Zhou, Y., & Lu, X. (2018) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2018.02.052 · Cited by 501
Self-citationParticle impact dampers: Past, present, and future
Lu, Z., Wang, Z., Masri, S. F., & Lu, X. (2018) · Structural Control and Health Monitoring · doi:10.1002/stc.2058 · Cited by 285
Self-citationLu, Z., Chen, X., Zhang, D., & Dai, K. (2017) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.2826 · Cited by 186
“[20, 21] conducted a series of shaking table tests for a three-story steel frame with a particle damper or buffered particle damper attached and found that the particle movements of the plug flow pattern can yield good vibration attenuation effects.”
BackgroundMethodSelf-citationA review of particle damping modeling and testing
Gagnon, L., Morandini, M., & Ghiringhelli, G. L. (2019) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2019.114865 · Cited by 159
Metadata
- Authors
- Lu, Z., Lu, X., Lu, W., & Masri, S. F.
- Venue
- Earthquake Engineering & Structural Dynamics
- Publisher
- Wiley
- Published
- 2011-09-21
- Volume
- 41
- Issue
- 5
- Pages
- 987-1000
- ISSN
- 0098-8847 (ISSN-L)
- 1096-9845
- OpenAlex
- W1961184682
- Cited by
- 80
- References
- 1
- FWCI
- 4.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.