The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Experimental and analytical study on the performance of particle tuned mass dampers under seismic excitation
Abstract
Summary: A particle tuned mass damper (PTMD), which is a creative integration of a traditional tuned mass damper and an efficient particle damper in the vibration control area, is proposed. This paper presents a comprehensive study that involves experimental, analytical, and computational approaches. The vibration control effects of a PTMD that is attached to a five‐story steel frame under seismic input are investigated by a series of shaking table tests. The influence of some parameters (auxiliary mass ratio, gap clearance, mass ratio of particles to the total auxiliary mass, frequency characteristics, and amplitude level of the input) is explored, and the performance of the PTMD with/without buffered material is compared. The experimental results show that the PTMD can achieve significant damping effects under seismic excitations, and the bandwidth of the suppression frequency is expanded, showing the device's robustness and control efficiency. In addition, an approximately analytical solution that is based on the concept of an equivalent single‐particle damper is presented, and the method to determine the corresponding system parameters is introduced. A comparative study between experimental and numerical results is conducted to verify the feasibility and accuracy of this analytical model. Copyright © 2016 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dynamic response and optimal design of structures with large mass ratio TMD
De Angelis, M., Perno, S., & Reggio, A. (2012) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.1117 · Cited by 239
Yan, W., Xu, W., Wang, J., & Chen, Y. (2014) · Journal of Bridge Engineering · doi:10.1061/(asce)be.1943-5592.0000525 · Cited by 54
Cited by
Research developments in vibration control of structures using passive tuned mass dampers
Elias, S., & Matsagar, V. (2017) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2017.09.015 · Cited by 556
Particle impact dampers: Past, present, and future
Lu, Z., Wang, Z., Masri, S. F., & Lu, X. (2018) · Structural Control and Health Monitoring · doi:10.1002/stc.2058 · Cited by 285
Self-citationDai, J., Xu, Z.-D., & Gai, P.-P. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2019.109585 · Cited by 163
Invited Review: Recent developments in vibration control of building and bridge structures
Ghaedi, K., Ibrahim, Z., Adeli, H., & Javanmardi, A. (2017) · Journal of Vibroengineering · doi:10.21595/jve.2017.18900 · Cited by 146
“[67] proposed a particle TMD based on the synthesis of the particle dampers and TMDs.”
BackgroundWang, J., Wierschem, N. E., Wang, B., & Spencer, B. F. (2020) · The Structural Design of Tall and Special Buildings · doi:10.1002/tal.1692 · Cited by 62
Metadata
- Authors
- Lu, Z., Chen, X., Zhang, D., & Dai, K.
- Venue
- Earthquake Engineering & Structural Dynamics
- Publisher
- Wiley
- Published
- 2016-11-07
- Volume
- 46
- Issue
- 5
- Pages
- 697-714
- ISSN
- 0098-8847 (ISSN-L)
- 1096-9845
- OpenAlex
- W2552736997
- Cited by
- 186
- References
- 2
- FWCI
- 30.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
