The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Seismic demand sensitivity of reinforced concrete shear‐wall building using FOSM method
Abstract
The uncertainty in the seismic demand of a structure (referred to as the engineering demand parameter, EDP) needs to be properly characterized in performance‐based earthquake engineering. Uncertainties in the ground motion and in structural properties are responsible for EDP uncertainty. In this study, sensitivity of EDPs to major uncertain variables is investigated using the first‐order second‐moment method for a case study building. This method is shown to be simple and efficient for estimating the sensitivity of seismic demand. The EDP uncertainty induced by each uncertain variable is used to determine which variables are most significant. Results show that the uncertainties in ground motion are more significant for global EDPs, namely peak roof acceleration and displacement, and maximum inter‐storey drift ratio, than those in structural properties. Uncertainty in the intensity measure (IM) of ground motion is the dominant variable for uncertainties in local EDPs such as the curvature demand at critical cross‐sections. Conditional sensitivity of global and local EDPs given IM is also estimated. It is observed that the combined effect of uncertainties in structural properties is more significant than uncertainty in ground motion profile at lower IM levels, while the opposite is true at higher IM levels. Copyright © 2005 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Simulation and the Monte Carlo Method
Rubinstein, R. Y., & Kroese, D. P. (2016) · Wiley Series in Probability and Statistics · doi:10.1002/9781118631980 · Cited by 3,356 · cited 6×
“One way of considering GMP uncertainty in probabilistic evaluation of structures is to employ MCS using a set of ground motions for a given IM to obtain a set of outputs.”
BackgroundInfluential
Cited by
Incorporating modeling uncertainties in the assessment of seismic collapse risk of buildings
Liel, A. B., Haselton, C. B., Deierlein, G. G., & Baker, J. W. (2009) · Structural Safety · doi:10.1016/j.strusafe.2008.06.002 · Cited by 469
Incremental dynamic analysis for estimating seismic performance sensitivity and uncertainty
Vamvatsikos, D., & Fragiadakis, M. (2010) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.935 · Cited by 397
On the application of machine learning techniques to derive seismic fragility curves
Kiani, J., Camp, C., & Pezeshk, S. (2019) · Computers & Structures · doi:10.1016/j.compstruc.2019.03.004 · Cited by 312
Metadata
- Authors
- Lee, T., & Mosalam, K. M.
- Venue
- Earthquake Engineering & Structural Dynamics
- Publisher
- Wiley
- Published
- 2005-06
- Volume
- 34
- Issue
- 14
- Pages
- 1719-1736
- ISSN
- 0098-8847 (ISSN-L)
- 1096-9845
- OpenAlex
- W2045206968
- Cited by
- 173
- References
- 1
- FWCI
- 12.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.