Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 256

The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.

Numerical investigation of a new combined energy system includes parabolic dish solar collector, Stirling engine and thermoelectric device

Open access
Mehrpooya, Mehdi, Ghadimi, Noradin, Marefati, Mohammad, Ghorbanian, Sohrab Ali·2021·International Journal of Energy Research

Abstract

According to new findings, the use of clean energy sources such as solar energy to supply energy (both electricity and heat) to human societies is essential. On the other hand, choosing the appropriate technology to convert solar energy into useful energy in the form of individual or combined systems is a fundamental issue. Individual solar energy systems have inherently low performance. However, their use in hybrid energy systems with other energy generation devices is key solution and shows high performance. The present work provides the performance of a new combined energy system composed of the parabolic dish solar collector (PDC), Stirling engine (SE) and thermoelectric device (TD) under various parameters. Sun is the main source of energy in this system, where, sunlight is focused on the PDC focal point by the parabolic shaped mirrors. Thus, the useful thermal power is produced by PDC and then feeds to the SE. The operating fluid of the engine is heated by this heat and converted into mechanical energy. Then, the mechanical energy is converted into electricity by a generator connected to the SE and the excess heat is lost from the engine. The exhaust of the SE transferred to the TEG hot end and produces further electricity. In addition, the TEC module absorbs the cooled environment heat and produces cooling energy (by consuming electricity from the TEG). Therefore, the proposed combined process provides the electricity, heat and cooling. The paper is based on the following three scenarios: (1) the system performance is evaluated under constant climatic conditions, (2) climate data from five various cities in Europe and Asia are used for system operation and (3) this scenario presents the general comparison between the two different hybrid energy systems driven by PDC and linear Fresnel reflector (LFR). In addition, multi-objective optimization is provided to obtain the optimal performance of the developed hybrid system. The optimization results showed that, the optimum total output electricity and overall efficiency were 26.21 kW and 39.17%, respectively. It was also found that, average daily useful power generated by PDC in Moscow on 14-June is 373.97 W/m2, which is about 11.1%, 1.55%, 33.3% and 14.23% more than Tehran, Beijing, Geneva and Kiev, respectively. Furthermore, increasing the temperature of PDC absorber improves the performance of SE and TD and subsequently improves the overall operation. Also, in terms of the PDC numbers, the system in the cities of Tehran, Beijing and Moscow has a better justification compared to the other two cities (Geneva and Kiev).

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/er.6891

Cites

26 of 26 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Metadata

Authors
Mehrpooya, M., Ghadimi, N., Marefati, M., & Ghorbanian, S. A.
Venue
International Journal of Energy Research
Publisher
Wiley
Published
2021-06-02
Volume
45
Issue
11
Pages
16436-16455
ISSN
  • 0363-907X (ISSN-L)
  • 1099-114X
OpenAlex
W3171074139
Cited by
256
References
26
FWCI
10.23
Type
journal article
Language
en
Open access
bronze

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.