Hydrocarbon gases and oils from the recycling of polystyrene waste by catalytic pyrolysis
Open accessThe DOI matches its Crossref record.
Abstract
The yield and composition of oils and gases derived from the pyrolysis and catalytic pyrolysis of polystyrene has been investigated. The pyrolysis and catalytic pyrolysis was carried out in a fixed bed reactor. Two catalysts were used, zeolite ZSM-5 and Y-zeolite and the influence of the temperature of the catalyst, the amount of catalyst loading and the use of a mixture of the two catalysts was investigated. The main product from the uncatalysed pyrolysis of polystyrene was an oil consisting mostly of styrene and other aromatic hydrocarbons. The gases were found to consist of methane, ethane, ethene, propane, propene, butane and butene. In the presence of either catalyst an increase in the yield of gas and decrease in the amount of oil produced was found, but there was significant formation of carbonaceous coke on the catalyst. Increasing the temperature of the Y-zeolite catalyst and also the amount of catalyst in the catalyst bed resulted in a decrease in the yield of oil and increase in the yield of gas. Copyright © 2004 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Mechanistic implications of plastic degradation
Singh, B., & Sharma, N. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.11.008 · Cited by 1,569
Catalytic pyrolysis of plastic waste: A review
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., & Nizami, A. S. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 964
Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 681
Self-citationRecycling of waste from polymer materials: An overview of the recent works
Hamad, K., Kaseem, M., & Deri, F. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.09.025 · Cited by 537
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Aranzabal, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.030 · Cited by 479
Metadata
- Authors
- Williams, P. T., & Bagri, R.
- Venue
- International Journal of Energy Research
- Publisher
- Hindawi Limited
- Published
- 2003-12-09
- Volume
- 28
- Issue
- 1
- Pages
- 31-44
- ISSN
- 0363-907X (ISSN-L)
- 1099-114X
- OpenAlex
- W2080094304
- Cited by
- 118
- References
- 0
- FWCI
- 0.26
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydrocarbon gases and oils from the recycling of polystyrene waste by catalytic pyrolysis. https://app.cochat.ai/papers/10.1002/er.949
- The paper
- Williams, P. T., & Bagri, R. (2004). Hydrocarbon gases and oils from the recycling of polystyrene waste by catalytic pyrolysis. International Journal of Energy Research. https://doi.org/10.1002/er.949
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.